M3-770X-S-Gm-i 20cm coaxials with 70 Watt RMS, sport grille with titanium look and RGB LED lighting

JL Audio
Your price:
€ 486,00
Price per pair (VAT included)
Calculating shipping costs to
Type
Coaxial
MAX Power
225 Watt
Speaker Size
200 mm
RMS Power
70 Watt
Grille Diameter
196 mm
Impedance
4 Ohm
Installation Hole
159 mm
Sensitivity
90,5 dB
Installation Depth
80 mm
Frequency Response
45 - 25.000 Hertz

JL Audio M3-770X-S-Gm-i 7.7" marine coaxial speakers with 70 Watt nominal power, 4 Ω impedance. Sport grille titanium finish and RGB LED lighting

The oversized 7.7" design of the M3-770X translates to greater efficiency (more power for a given amount of power). This gives them the ability to play louder and cleaner at high volumes compared to smaller speakers.

Woofer optimized to operate with a large volume of air behind it (at least 2 cu. Ft. / 57 l). The use of this coaxial system in less space will compromise its low frequency performance.

A 0.75" pure silk dome tweeter, specially treated to resist the marine environment, handles high frequency duties. Silk was chosen for its lightness, excellent damping properties and smooth response characteristics.

Integrated into the grille frame, the internal LED lighting unit was meticulously designed to uniformly illuminate the woofer cone area with a vivid glow, adding a dynamic visual experience to open water trips. Optional RGB controller to create thousands of color variations. Professional installation is strongly recommended.

Although the M3-770X coaxial systems can be used with a minimum of 20 W per channel, for best audio performance we recommend amplifiers with continuous power between 75 and 100 W per channel.

Sold in pairs.

JL Audio M3-770X-S-Gm-i technical specifications

Nominal power (RMS) 70 W
Maximum power 225 W
Recommended amplifier power (RMS) 20 - 140 W / Ch.
System efficiency 90.5 dB @ 1 W / 1 m
Nominal system impedance 4 Ω
System frequency response 45 Hz - 25 KHz ± 3 dB
Outer frame diameter 7.70" / 196 mm
Bolt hole circle diameter 6.92" / 176 mm
Outer motor diameter 4.27" / 108 mm
Front grille protrusion 1.00" / 25 mm
Mounting hole diameter 6.25" / 159 mm
Mounting depth 3.15" / 80 mm

€ 486,00 Price incl. VAT