SWR-T12

Alpine

Discontinued

Your price:
€ 369,90
Price per single item (VAT included)
Type
Subwoofer
Speaker Size
320 mm
MAX Power
1800 Watt
RMS Power
600 Watt
Frequency Response
28-200 Hertz
Sensitivity
89 dB
Impedance
4 Ohm
Installation Depth
82 mm
Woofer Material
Composito di cellulosa

SWR-T12 - Ultra-Thin Type-R Subwoofers 30cm.

The Thin Type-R series combines the exceptional performance of traditional Type-R subwoofers in an extremely slim design, optimized for tight spaces.

Installation Flexibility Without Compromise

The Type-R Thin subwoofer series was designed to offer greater installation flexibility and application versatility to build the ideal audio system. At 82 mm depth for the 10'' and 89 mm depth for the 12'', these SUBs deliver deep bass performance where normally nothing could be installed. The 9.9 L (SWR-T10) and 17 l (SWR-T12) required for ideal enclosures allow them to be installed anywhere in your vehicle.

Alpine's Exclusive Technology Ensures High Performance
The new Type-R Thin series boasts no fewer than 7 unique technologies that Alpine designed directly. These innovations allow the THIN series to have excursion and power common only to Type-R Subwoofers but in half the space normally occupied. The design of the new Type-R Thin series has the same DNA as the famous Type-R series - demanding and clean, with an even greater capacity to reproduce deep, fast and accurate bass.

The Revolutionary Segmented Spider Design Guarantees Large Subwoofer Excursion
You can rely on the new Type-T Thin subwoofers to achieve high-impact sound systems, as all their predecessors have. Most ultra-flat subwoofers have much less power than normal subwoofers because their structure greatly limits cone movement. The Thin series uses the new patented technology, Pass-Through Gap Geometry, with a segmented thermoplastic spider. This allows the cone and voice coil to have excursion greater than 50 mm peak-to-peak, moving substantial air mass.

Optimal Performance Immediately Available
There will be no need to break in the sub by installing it in an enclosure and using it for hours. This sub is designed to deliver the best performance immediately, right after taking it out of the box. Because injection molded resin was used rather than rigid fabric phenolic, this spider is immediately ready to deliver optimal performance. An aluminum structure ensures the spider and voice coil excellent durability.
These two graphs were created using reference measurement systems, Klippel. These show the subwoofer excursion relative to magnetic force, stiffness, and suspension linearity.

FEA Optimized = Maximum Linearity
Alpine's Patented Dual-Sided Compound Radius Curve pole geometry ensures symmetric magnetic field with flux density optimized to significantly reduce distortion, improving output performance (U.S. Patent #6,639,993).

More Excursion = More Power
The new FEA optimized structure, along with the revolutionary Multi-Roll suspension (HAMR) provides the new Type-r Thin series with the best X-Max and SPL output of its category.
The measured X-MAX of 15mm, allows the new Type-R to deliver the best category response, ultra-limited distortion and excellent sound quality.

Increase Performance, with Power
What is the right amplification for one or two thin subwoofers?

More Control, in a Small and Lightweight Design.
Type-R Thin subwoofers have 1.5lb of neodymium magnet, which provides magnetic force five times greater than normal magnets used for subwoofers. This powerful magnet combined with a 4'' (100mm) voice coil offers greater power handling and more precision, more power and even cleaner bass.

Lightweight Cone Material Designed for Best Performance
A very strong magnet requires a cone with very resistant materials. A specially designed cone, reinforced by injections, provides cone rigidity, minimizing losses. A center dust cap, assembles and locks the moving voice coil in position. This makes the entire system extremely rigid and linear.

Keep it Cool = Keep it Playing
Alpine's Patented Radial Vented VC Heat Sink and Airflow Management System (US Patent #7,634,101) helps to minimize power compression and ensures reliable long playing time by actively pulling (or transferring) output-robbing heat away from the Voice Coil
The new die-cast aluminum frame is directly coupled to the machined aluminum structure. This allows the entire frame to act as a heat sink for handling sustained power, even in the most extreme applications.

Alpine's Unique Technology

Radial Vented VC Heat Sink & Airflow Management System
Actively manages voice coil temperature by forcing air inside the color heat sink.

FEA Optimized Dual-Sided Machined CRC Motor Structure
Creates a symmetric magnetic field with uniformly distributed flux density to significantly reduce distortion, further improving power handling and output.

FEA Optimized Injection Molded TPE Spider with Pass-Through Gap Design
Provides simple mechanical movement, to ensure the 50mm needed for peak-to-peak excursion, unleashing enormous output potential for such a compact design.

FEA Optimized HAMR Surround
The Multi-Roll Surround suspension allows extreme excursions, without sacrificing cone space.
The FEA Optimized and Santoprene ® injections, combined with the HAMR Surround provides excursion control eliminating distortion.

FEATURES
Cone

Material: Aluminum
Design: Structural Parabolic w/ Force Transfer Assembly

Surround

Material: Injected Molded Santoprene
Design: FEA-Optimized High Amplitude Multi-Roll (H.A.M.R.) (Patent Pending)

Spider

Material: Thermoplastic Elastomer (TPE)
Design: Co-Molded Regressive w/ Integrated Tinsel Leads

Voice Coil

Material: 220C Edge-Wound Copper Ribbon Wire
Design: Oversized 100mm (4'') Underhung Voice Coil

Motor Structure

Pole Geometry: FEA-Optimized Dual Compound Radius Curve w/ Pass Through Gap Design (Patent #6,639,993, 2 Patents Pending)
Configuration: Radial Vented VC Heat Sink & Shorting Sleeve w/ Airflow Management System (Patent 7,634,101)

Frame

Material: Cast Aluminum
Design: Direct-Couple Shorting Sleeve/Heatsink and Frame Design

Terminals

Layout: One Side
Design: Heavy Duty Gold-Plated Insert Block Terminals

Connecting Braids

Design: Woven Spider Integration Design

Mounting

Design: Concealed MountGasket System (US Patent #7,760,900)

SPECIFICATIONS
Power Specifications

CEA-2031 Power Rating: 600W
Power Range: 300 - 600 Watts
RMS Power Handling: 600W
Peak Power Handling: 1800 Watts

Dimensions

Mounting Depth: 89 mm (3.5'')
Mounting Diameter: 275mm (10.85'')
Speaker Volume: 2.27 l (Front Mounting)
Additional Volume: 1.42 l (External Installation, External Magnet)

General

Frequency Response: 26Hz - 200Hz

Manuale e specifiche BOX

20131214114310-om-swr-t12-en.pdf
Discontinued