TS6822 TWIN TUNER decoder with dual tuner, digital terrestrial video recorder

TeleSystem

Discontinued

Your price:
€ 51,90
Price per single item (VAT included)

TeleSystem TS6822 TWIN TUNER decoder with dual tuner, digital terrestrial video recorder and Media player.

This decoder stands out for its dual digital terrestrial tuner DVB-T2 HEVC 10 bit that allows you to record a program in High Definition and at the same time watch another channel. Remote control included with TV function buttons.

By connecting an external memory (FAT32) through the USB port, you can record your favorite programs and movies with extreme ease or pause the live programming of a channel and resume viewing later thanks to the TIMESHIFTING function.

Moreover TS6822 PRO transforms itself when needed into a multimedia player to play music, photos and videos directly on your home TV even with MPEG-4 H.265 compression. The AUTOSCAN function scans, while the decoder is in stand-by, the television frequencies and autonomously loads any new channels broadcast, while the LCN "Logical Channel Number" function logically and automatically arranges the channel list.

VIDEO RECORDING FUNCTION

Instructions for using USB memory (Hard Disk Driver) or flash memory/flash drive.

Connection

USB memory must be formatted in FAT32 and, to use the video recording function, must have a free memory capacity of at least 16gb. When first recording a USB memory device, the receiver will create a folder called PVRS which will be used by it as a recording archive.

Disk Removal

For safe removal of the memory, in order to avoid damage to files or devices involved, it is recommended to disconnect the USB memory only during USB port inactivity or when the receiver is in standby mode with USB port power turned off.

TV Program Recording

Instant recording
To start recording manually, tune to the desired channel and press the REC button. To stop it, press the STOP button and confirm. After starting the recording it is possible to press the REC button a second time to set a duration to the recording itself.

Scheduled recording
It is possible to program multiple recording timers manually (or, alternatively, for simple viewing) by accessing the timer programming menu directly with the TIMER button on the remote control or from the EPG menu with the REC button (Recording).

Playback of recorded content

Recorded files are saved in the USB memory dedicated to recording and can be accessed by opening the PVRS folder from the Recordings menu.
By pressing the OK button on a recording, playback will start. Press the OK button a second time to switch from preview mode to full screen view and vice versa.

During playback, use buttons 4/; (PLAY/PAUSE) to pause/resume viewing, 7 / 8 (REW/FWD) for rewind/fast forward and <(STOP) to stop playback.
Instead, at the recorded file list, use the RED button to get additional information about the duration, GREEN to sort recordings by title, YELLOW to delete the recording and BLUE to delete all recordings.

CONTROL YOUR TV WITH JUST 1 REMOTE CONTROL

How to pair the decoder remote control with your TV

Remote control buttons and functions (TV Control)

1) Hold down the PROG button for more than 3 seconds until the LED indicator on the remote control remains lit.

2) Point the transmitter of the television remote control towards the IR sensor of the decoder remote control, at a distance of about 3 centimeters. Make sure that the two IR sensors are aligned throughout the procedure.

3) Press (once) the decoder remote control button you want to program: the LED will start blinking.

4) Press (once) the television remote control button corresponding to the function to be associated with the button from point 2. Once programming is complete, the LED will stop blinking and the remote control will remain in learning mode. Repeat steps 2-4 for the On/Off – AV/TV – VOL-/Vol+ buttons

5) Press the PROG button to end programming and the LED will turn off.

Discontinued