MV700/5i 5-channel Class D marine amplifier with built-in DSP, 700 W power

JL Audio
Your price:
€ 1237,00
Price per single item (VAT included)

Information and details

Calculating shipping costs to
Amplifier Type
5 channels
RMS Power 4 Ohm
4x75 + 1x180 Watt
RMS Power 2 Ohm
4x100 + 1x300 Watt
Signal-to-Noise Ratio
99 dB S/N
Mono RMS Power 4Ω
2x200 + 1x300 Watt
Size
355 x 176 x 52 mm
DSP
Yes

JL Audio MV700/5i marine class D 5-channel amplifier with integrated DSP, 700 Watt power

Designed to deliver reference audio performance in marine environments, each MVi amplifier combines JL Audio's NexD2 switching amplification technology with a fully integrated digital signal processor.

Equipped with second-generation NexD2 technology, the MV700/5i is capable of powering a complete marine audio system. It can drive four main speakers at 75 W x 4 at 4 Ohm, while also powering a subwoofer up to 300 W at 2 Ohm. Linking the main channels transforms it into a very powerful 3-channel system amplifier with up to 200 W x 2 at 4 ohm on the main channels and 300 W at 2 ohm on the subwoofer channel.

The full range NexD2 technology in this amplifier's main channels is controlled by DSP and features a reduced ring area design utilizing DirectFET outputs for exceptional fidelity, very low noise and exceptional efficiency. The subwoofer channel features an optimized low frequency variant of NexD2 technology. The amplifier chassis is an ultracompact cast alloy design with marine powder coat finish and corrosion-resistant hardware.

Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, tablet or smartphone), with the appropriate JL Audio TüN software application installed.

The amplifier includes: power connector (for 4 AWG cable), speaker output cables (2), subwoofer output wiring, 2 meter USB A/B cable

Price incl. VAT
€ 124,00

Manuale utente

n-20200327174913-mv-700-5i-man.pdf

JL Audio MV700/5i technical specifications

Continuous rated power (RMS) at 14.4 V
Main channels @ 4 Ω 75 W RMS x 4
Main channels @ 2 Ω 100 W RMS x 4
Main channels: bridged at 4Ω 200 W RMS x 2
Subwoofer channel @ 4 Ω 180 W RMS x 1
Subwoofer channel @ 3 Ω 240 W RMS x 1
Subwoofer channel @ 2 Ω 300 W RMS x 1

Continuous rated power (RMS) at 12.5 V
Main channels @ 4 Ω 60 W RMS x 4
Main channels @ 2 Ω 90 W RMS x 4
Main channels: bridged at 4Ω 180 W RMS x 2
Subwoofer channel @ 4 Ω 180 W RMS x 1
Subwoofer channel @ 3 Ω 240 W RMS x 1
Subwoofer channel @ 2 Ω 300 W RMS x 1

Frequency response (main channels) 12 Hz - 24 kHz (+0, -1dB)
Frequency response (subwoofer channel) 12 Hz - 1 kHz (+0, -1dB)
S/N ratio, referred to maximum rated power (Analog Inputs - Main Channels) 99 dB (A-weighted, noise bandwidth 20 Hz - 20 kHz)
S/N ratio, referred to maximum rated power (Analog Inputs - Subwoofer Channel) 99 dB (A-weighted, noise bandwidth 20 Hz - 20 kHz)
S/N ratio, referred to 1 W (Analog Inputs - Main Channels) 80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N ratio, referred to 1 W (Analog Inputs - Subwoofer Channel) 72 dB (A-weighted, noise bandwidth 20 Hz - 20 kHz)
Damping factor @ 4 Ω> 150/50 Hz
Damping factor @ 2 Ω> 50/50 Hz
THD + N @ Rated power (main channels) <1% @ 2 Ω per channel.
THD + N @ Rated power (subwoofer channels) <1% @ 2 Ω per channel.
Input voltage range @ RCA Inputs 250 mV - 16 V RMS
Power cable min/copper wire 4 AWG Cable
Rated fuse 60 A (AFS, AGU or MaxiFuse™)
IP rating IPX2

Height (H) 2.05 inches / 52 mm
Width (W) 13.96 inches / 355 mm
Depth (D) 6.93 inches / 176 mm
Net weight 5.6 lb / 2.54 kg

€ 1237,00 Price incl. VAT