MV1000/5i 5-channel Class D marine amplifier with built-in DSP

JL Audio
Your price:
€ 1464,00
Price per single item (VAT included)

Information and details

Calculating shipping costs to
Amplifier Type
5 channels
RMS Power 4 Ohm
4x75 + 1x400 Watt
RMS Power 2 Ohm
4x90 + 1x600 Watt
Signal-to-Noise Ratio
99 dB S/N
Mono RMS Power 4Ω
2x200 + 1x400 Watt
Size
355 x 176 x 52 mm
DSP
Yes

JL Audio MV1000/5i 5-channel marine class D system amplifier with integrated DSP, 100 W x 4 @ 2 Ω + 600 W x 1 @ 2 Ω - 14.4 V

Designed to deliver reference audio performance in marine environments, each MVi amplifier combines JL Audio NexD2 switching amplification technology with a fully integrated digital signal processor.

Equipped with second-generation NexD2 technology, the MV1000/5i is capable of powering a complete marine audio system. It can drive four main speakers with 75 W x 4 at 4 Ohm, while also powering a subwoofer up to 600 W at 2 Ohm. Bridging the main channels transforms it into a very powerful 3-channel system amplifier with up to 200 W x 2 at 4 ohm on the main channels and 600 W at 2 ohm on the subwoofer channel.

The full range NexD2 technology in the main channels of this amplifier is controlled by DSP and features a reduced ring-area design that utilizes DirectFET outputs for exceptional fidelity, very low noise and exceptional efficiency. The subwoofer channel features an optimized low-frequency variant of NexD2 technology. The amplifier chassis is an ultracompact cast alloy design with marine powder finish and corrosion-resistant hardware.

Rather than traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, tablet or smartphone), with the appropriate JL Audio TüN software application installed.

The amplifier includes: power connector (for 4 AWG cable), speaker output cables (2), subwoofer output wiring, 2 meter USB A/B cable

Price incl. VAT
€ 124,00

JL Audio MV1000/5i technical specifications

Continuous nominal power (RMS) at 14.4 V
Main channels @ 4 Ω 75 W RMS x 4
Main channels @ 2 Ω 100 W RMS x 4
Main channels: bridged at 4Ω 200 W RMS x 2
Subwoofer channel @ 4 Ω 400 W RMS x 1
Subwoofer channel @ 3 Ω 500 W RMS x 1
Subwoofer channel @ 2 Ω 600 W RMS x 1

Continuous nominal power (RMS) at 12.5 V
Main channels @ 4 Ω 60 W RMS x 4
Main channels @ 2 Ω 90 W RMS x 4
Main channels: bridged at 4Ω 180 W RMS x 2
Subwoofer channel @ 4 Ω 360 W RMS x 1
Subwoofer channel @ 3 Ω 480 W RMS x 1
Subwoofer channel @ 2 Ω 600 W RMS x 1

Frequency response (main channels) 12 Hz - 24 kHz (+0, -1dB)
S/N ratio, referred to maximum nominal power (Analog inputs - Main channels) 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N ratio, referred to maximum nominal power (Analog inputs - Main channels) 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N ratio, referred to maximum nominal power (Analog inputs - Subwoofer channel) 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N ratio, referred to 1 W (Analog inputs - Main channels) 80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N ratio, referred to 1 W (Analog inputs - Subwoofer channel) 72 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping factor @ 2 Ω> 50/50 Hz
Damping factor @ 4 Ω> 150/50 Hz
THD + N @ Nominal power (main channels) <1% @ 2 Ω per channel.
THD + N @ Nominal power (subwoofer channels) <1% @ 2 Ω per channel.
Range of input voltages @ RCA inputs 250 mV - 16 V RMS
Power cable min/copper wire 4 AWG cable
Rated fuse 80 A (AFS, AGU or MaxiFuse™)

Height 2.05 inches / 52 mm
Width 13.96 inches / 355 mm
Depth 6.93 inches / 176 mm
Net weight 5.6 lb / 2.54 kg

€ 1464,00 Price incl. VAT