M600/6-24V 6-channel 24 V Class D amplifier

JL Audio
Your price:
€ 736,00
Price per single item (VAT included)

Information and details

Calculating shipping costs to
Amplifier Type
6 channels
Crossover
Yes
RMS Power 4 Ohm
6x75 Watt
RMS Power 2 Ohm
6x100 Watt
Signal-to-Noise Ratio
104 dB S/N
Mono RMS Power 4Ω
3X200 Watt
Size
260 X 180 X 52 mm
Weight
2,6 Kg

JL Audio M600/6-24V marine full-range 6-channel class D amplifier, 24V systems only, power 75 W x 6 @ 4 Ω

The M600/6-24V amplifier is incredibly flexible and packs an incredible 100 watts on each of its six channels at 2 Ω (28.8 V, 1% THD) into its small enclosure. The innovation that makes this great power possible in such a compact chassis is our NexD ultra-high-speed switching design, which enables full-bandwidth class D operation with extremely low distortion and exceptional efficiency.

With the JL Audio M600/6-24V, you have a lot of great options. Use it as a six-channel amplifier with 75 W x 4 @ 4 Ω or connect four of its channels to create a staggered-power four-channel amplifier with 200 W x 2 @ 4 Ω on a pair of satellites and 75 W x 2 @ 4 Ω to a secondary pair of satellites. You can also drive two 200 W subwoofers each, plus a pair of 75 W x 2 satellites.

M600/6-24V includes a 12 dB/octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable crossover frequency selection from 50-500 Hz. With the addition of an HD-RLC remote level control (sold separately), you can control the level of two, four, or all six channel levels of the amplifier from a remote location.
This marine amplifier is characterized by white and gray powder coat finishes, a sealed cover for the controls, and stainless steel hardware for increased durability in the marine environment. M600/6-24V is designed for operation with 24-volt electrical systems with negative ground; use of this product with ground and/or voltages other than 24 V may cause damage to the product and void the warranty.

JL Audio M600/6-24V Technical Specifications

Power outputs:

@ 4 Ω 75 W RMS x 6

@ 2 Ω 100 W RMS x 6

Bridged @ 4 Ω 200 W RMS x 3

Frequency response 12 Hz - 22 kHz (+0, -1 dB)

S/N ratio, referenced to maximum rated power > 104 dB below rated power (A-weighted noise bandwidth, 20 Hz - 20 kHz)

S/N ratio, referenced to 1 W > 84 dB (A-weighted noise bandwidth, 20 Hz - 20 kHz)

Damping factor @ 4 Ω > 150/50 Hz

Damping factor @ 2 Ω > 75/50 Hz

THD + N @ Rated power <1% @ 2 Ω per ch.

Input voltage range @ RCA inputs 100 mV - 4 V RMS

Gauge Min. Copper Power/Ground Wire Gauge 4 AWG

Fuse value 30 A (AFS, AGU or MaxiFuse

Height (H) 52 mm

Width (W) 260 mm

Depth (D) 180 mm

Net weight 2.63 kg

Price incl. VAT
€ 124,00

Manuale utente

n-20180216152841-m600-6-24v-man.pdf
€ 736,00 Price incl. VAT