GZHW 10-D2 FLAT 25 cm / 10″ Flat Subwoofer

Ground Zero
Your price:
€ 335,14
instead of:€ 349,10
You save € 13,96
Offer valid until 29/11/2026
Price per single item (VAT included)
Black Friday: offers valid until 29 November
Calculating shipping costs to

GZHW 10-D2 FLAT High-Quality 25 cm / 10″ Flat Subwoofer

A high-quality 25 cm (10-inch) flat subwoofer, designed for installation in tight spaces where mounting height is limited. Its 10-inch diameter and 103 mm mounting depth make it suitable for a variety of installation solutions, as indicated in the technical specifications.

Construction and Materials

The basket is made of solid die-cast aluminum, ensuring a rigid and stable structure for the moving assembly. The cone is made of sandwich paper, a multi-layered construction that combines lightness and rigidity. The suspension is a U-shaped rubber surround, which helps control the cone's excursion.

Voice Coil

The voice coil has a diameter of 63 mm (2.5 inches) and is made of copper. It features a 4-layer winding, a design that complements the structure of the moving assembly. The connection terminal is a push terminal.

Optimization and Measurement

The subwoofer is optimized using the Klippel® system, a measurement tool used to analyze the transducer's behavior. The manufacturer states that this optimization is part of the model's development process.

Power and Amplifier Matching

The manufacturer specifies a power handling capacity of 600 W RMS and 1000 W SPL. The recommended power range is between 400 and 1000 W. With a stated efficiency of 85 dB, It is advisable to verify that the amplifier is capable of delivering power within the specified range, taking into account the 2 × 2-ohm impedance of the transducer configuration.

Thiele-Small Parameters

The datasheet lists a resonance frequency (Fs) of 35.5 Hz, a damping factor (Qts) of 0.434, and an equivalent volume (Vas) of 19.7 L (0.70 cu. ft.). These parameters are useful for designing the enclosure volume and low-frequency response. The maximum excursion (Xmax) is 29 mm (1.14 inches), a key figure for evaluating the speaker's ability to reproduce low frequencies at high volume levels.

Mounting Specifications

The mounting hole has a diameter of 238 mm (9.37 inches) and a mounting depth of 103 mm (4.06 inches). Before installation, it is advisable to check the available dimensions in the vehicle and the space required for the enclosure.

Technical Data

sjYLYc-GZHW-10-D2-FLAT_TechnicalData_EN.pdf

Product Info

pjGtzr-GZHW-10-D2-FLAT_Info_EN.pdf

Owner's Manual

NGQLDp-GZHW-10-D2-FLAT_OM_AWV4.0.pdf

GZHW 10-D2 FLAT High-Quality 25 cm / 10″ Flat Subwoofer Technical Specifications

  • High-quality flat subwoofer
  • Diameter: 25 cm / 10″
  • RMS Power/SPL: 600 / 1000 W
  • Recommended Power: 400 - 1000 W
  • Sensitivity: 85 dB
  • Impedance: 2 × 2 ohms
  • Cone: paper sandwich
  • Suspension: U-shaped rubber surround
  • Basket: solid die-cast aluminum
  • Voice coil: 63 mm / 2.5″ copper, 4 layers
  • Terminal: push terminal
  • Maximum excursion (Xmax): 29 mm / 1.14″
  • Mounting hole Ø: 238 mm / 9.37″
  • Mounting depth: 103 mm / 4.06″
  • Resonance frequency (Fs): 35.5 Hz
  • Damping factor (Qts): 0.434
  • Equivalent air volume (Vas): 19.7 L / 0.70 cu. ft.
€ 335,14 instead of: € 349,10
Black Friday: offers valid until 29 November