CF0044UNUN41 FIREWALL OBD2

Paser
Your price:
€ 122,00
Price per single item (VAT included)
Calculating shipping costs to

Paser CF0044UNUN41 OBD2 Firewall, electronic alarm against tampering attempts on the OBD2 port, STAND ALONE management through vehicle ignition sequences or via remote control sold separately.

OBD2 FIREWALL is a car alarm that stands between external devices and the vehicle's communication BUS, preventing any unauthorized access to system configuration data.

Through the use of key duplicators and OBD access, it is possible for a malicious person to generate new vehicle access codes in just a few seconds, excluding the alarm device present. OBD2 FIREWALL protects the vehicle by making this impossible!

Features and operation

OBD2 FIREWALL connects via Plug & Play wiring to the OBD2 connection by replicating the port and thus keeping vehicle operation unchanged. Access to diagnostics will therefore always be possible under normal conditions but denied in anti-theft mode.

OBD2 FIREWALL is able to operate in "stand alone" mode, through a remote control (optional) or in combination with the alarm system installed on the vehicle, automatically activating the data protection function when the anti-theft system is activated.

OBD2 FIREWALL automatically switches to low-power mode when there is no activity on the bus, reactivating real-time data passage as soon as it is required. When protection is active, data passage to the car system is never allowed.

OBD2 FIREWALL is easily programmable via a button and a multicolor LED positioned on the front.

The LED shows the module status:
RED: ACTIVE >> the CAN bus line cannot be reached via the OBD port at its socket
GREEN: NOT ACTIVE >> the CAN bus line is reachable
YELLOW: the module is in configuration mode

When OBD2 FIREWALL is connected to the OBD port as shown in the diagram on the next page, on first use, the status is "ACTIVE" (RED LED).
Through the configuration menu it is possible to pair one or more radio frequency remote controls with the module.


OBD2 FIREWALL can be managed by an existing alarm system installed on the car by connecting the control cable to the reference output of the alarm control unit.
Using the configuration menu it is possible to choose the reference level of the command signal (GND Reference or Vcc).
It is also possible to select the activation status for the selected signal (Activation ON or OFF), the number (1 or 3) of activations and management via wire/remote control or remote control only.

When an external alarm is connected, its activation command takes priority over the remote control.

When the configuration procedures have been completed, it is necessary to disconnect and reconnect the module for it to become operational.

BUZZER:
long sound >> Active | 2 short sounds >> Not Active

Manuale utente

n-20170405155717-firewall-1-0-16-ita.pdf
€ 122,00 Price incl. VAT