PP 62DSP high-end 6-channel amplifier

Match
Your price:
€ 544,00
Price per single item (VAT included)
In stock, ready to ship

Information and details

Calculating shipping costs to
Amplifier Type
6 channels
Amplifier Class
AB
RMS Power 4 Ohm
4x35 + 1x160 Watt
RMS Power 2 Ohm
4x50 + 160 Watt
Signal-to-Noise Ratio
103 dB S/N
Total Harmonic Distortion
0,01 % THD
S/PDIF Digital Input
No
High Level Input
YES
Size
184 x 139 x 44 mm

Match PP 62DSP 5/6 channel Plug&Play amplifier with integrated DSP and 2 RCA outputs

PP 62DSP main features

This 5/6 channel Plug & Play amplifier in class AB with 8 channels served by a DSP processor for easy connection to original audio systems using specific vehicle adapter cables.

Intelligent high level input with ADEP circuit and EQs, Jack input for optional URC2A remote control, MEC slot for additional input modules such as Bluetooth audio streaming, Aux input or SPDIF optical input ...

Allows multiple configuration options (6 channel amplifier with a total of 8 DSP channels), 2 channel PreOut freely configurable for connection of other amplifiers. Input sensitivity adjustable from 5V to 11V.

The MicroSD card reader allows you to easily configure the PP62DSP without the need to directly connect a personal computer. A large number of car-specific configurations is available for free online at www.audiotec-fischer.com.

SMD technology and four-layer printed circuits for maximum reliability together with a more compact design

Furthermore, the PP 62DSP is compatible with Start/Stop, has auto turn-on function with energy saving mode that allows you to significantly reduce the power consumption of the PP62DSP (or any amplifier connected to it) from the moment no input signal is detected after 60 seconds. Please note that in many vehicles using the "CAN" system or any other internal bus system, it may happen that the head unit (and therefore the PP 62 DSP) remains "invisible" and on for up to 45 minutes after completely turning off the vehicle.

The latest generations of OEM head units perform sophisticated diagnostics on connected speakers. By connecting an amplifier, error messages could be triggered with loss of specific functionalities (for example Fader function). The new ADEP circuit (Advanced Diagnostics Error Protection) prevents these problems without loading the speaker outputs of the OEM head unit.

PP62 DSP picks up the amplified signal from the original or aftermarket source through the included PP-ISO2 cable, 2 meters long, (5 meter cable PP-ISO 5 sold separately) and converts the amplified (analog) signal into digital signal.

Performs signal processing (electronic crossover, equalizer, time alignment), converts the appropriately processed digital signal back into analog format.

Amplifies the obtained signal driving the front, rear speakers and subwoofer, which can remain the original ones or replaced with more performing models.

The sound result obtained will finally be definable as hi-fi, thanks to the correct filtering of the speakers (thanks to the active crossover) which will finally be able to reproduce a sound with natural and captivating timbre (thanks to the equalizer) and a truthful sound stage (thanks to time alignment) that will literally make the speakers disappear (it will be extremely difficult to distinguish their positioning) to leave space only for a new sound stage: every instrument and every artist will occupy the exact space where they were during recording, that is music ... as it should be.

Main features of the PP 62DSP

Power channels 1 - 2 - 3 - 4

  • 35 watts RMS at 4 ohm
  • 50 watts RMS at 2 ohm

Power channel for subwoofer

  • 160 watts RMS at 2 ohm

DSP Resolution: 56 bit

AD and DA Converters: BurrBrown 24-bit

DSP processor Clock: 172 MHz

Frequency response: 20 Hz - 22,000 Hz1

Distortion: <0.01%

Ratio: > 103 dB

Damping factor > 100

Input impedance: 13 ohm

Input sensitivity: 5 - 11 Volt

4 high level inputs

1 input for additional MEC modules (MATCH Extension Card)

Mini USB port for PC connection

PP-ISO2 connection cable included (2.20 m)

Socket for optional programmable URC2A remote control

Compatible "Start and Stop" up to 6 Volt voltage

MCM technology with "ECO mode"

Dimensions: 184 x 44 x 139 mm

Manuale utente

n-20161110152737-ba-pp62dsp.pdf
€ 544,00 Price incl. VAT