F2 130

Audio System Italy

Discontinued

Amplifier Type
2 channels
RMS Power 4 Ohm
2x65 Watt
RMS Power 2 Ohm
2x110 Watt
Mono RMS Power 4Ω
1x220 Watt
RMS Power Mono 2Ω
1x350 Watt
Crossover
Yes
Signal-to-Noise Ratio
97 dB S/N
Total Harmonic Distortion
0.005% % THD
Size
220x180x50 mm
Weight
1,7 Kg

The F2 are stereophonic amplifiers equipped with high-dynamics output stage, capable of handling low impedance speaker systems. The high amount of available current quadruples its power in mono bridge configuration, transforming a "Small" 230 Watt per channel into a Monster of 1250 Watt RMS! They integrate reversible crossovers with independent adjustment and are designed to work also in multi-amplification, as elements of a powerful SPL motor branded Audiosystem. Their energy concentrate is always expressed in respect of Music, enviable tonal qualities, first-class technical characteristics. Great power in compact dimensions.

The F2 130 is capable of driving 2 ohm subwoofer systems with 350 Watt RMS in mono bridge.

INTEGRATED TECHNOLOGIES

| GPS | Global Protection System

GPS comprises a series of devices dedicated to the global protection of the amplifier and speakers. Short circuit and overheating, DC current at output and power-up transients, are continuously monitored. It is a system that controls the rotation of the cooling fan, varying its speed as the heatsink temperature varies. Directly linked to GPS, it guarantees the most effective dissipation of the generated heat.

| THERMOSPEED | Active Forced-cooling System

It is a system that controls the rotation of the cooling fan, varying its speed as the heatsink temperature varies. Directly linked to GPS, it guarantees the most effective dissipation of the generated heat.

| E.NO.DE. | Electromagnetics Noise Destroyer

The input circuitry of the Twister is immune to disturbances generated by the vehicle's electrical system. ENODE eliminates ground loops, favoring installation speed and guaranteeing impeccable reproduction.

TECHNICAL CHARACTERISTICS

Stereo RMS Power @4ohm Watt 65 x2
Stereo RMS Power @2ohm Watt 110 x2
Stereo Dynamic Power @2ohm Watt 128 x2
Mono Bridge RMS Power @4ohm Watt 220 x1
Mono Bridge RMS Power @2ohm SUB Watt 350 x1
Min. Load Impedance Stereo Ohm 2
Min. Load Impedance Mono Bridge Ohm 2 SUB
Damping factor @4ohm - >400
Input Sensitivity Range mV 0.17-4.3
Input Impedance Kohm >11
Filter [quantity] type - [1] HP or LP
Filter operating range Hz 45-300
Filter Slope dB/oct. 12
Frequency response -3dB Hz 5-100.000
THD Distortion @1KHz - 90% nominal power 4ohm % <0.05
DIM Distortion - 90% nominal power 4ohm % <0.005
Signal/Noise Ratio - 10Hz-22KHz - 90% nominal power dB 94
Signal/Noise Ratio "A" weighted - 10Hz-22KHz - 90% nominal power dB 97
Power Supply Voltage Range Volt 10.5-16
Min. Power Cable Section for 5 m. length – Metric mm2 8
Min. Power Cable Section for 5 m. length – US AWG 8
Maximum current absorption Stereo @4ohm A 15
Maximum current absorption Mono Bridge @4ohm A 25
Idle current - without input signal A 0.64
Minimum absorbed current - amplifier off mA 0.001
Fuses A 1x 25A
Weight Kg 1.7
Dimensions L x W x H mm 220x180x50

Manuale

20061005171706-man-ads-twst-ii-f2.pdf
Discontinued