bit Nove 6 in + 9 out processor

Audison

Discontinued

Your price:
€ 389,00
Price per single item (VAT included)

The new Audison Bit Nove processor is equipped with 6 analog inputs that accept high level signals (3 ÷ 20V) or low level (1.2 ÷ 8V) + 2 optical inputs and 1 aux input.

This processor interfaces with every type of aftermarket and OEM (factory) source. The auxiliary input on RCA connectors (0.3 ÷ 5V) is perfect for connecting your smartphone or tablet to the bit Nove with maximum quality. The advanced PC software sums the channels belonging to the same front and de-equalizes the frequency response of the OEM source in just a few simple steps.
The Bit Nove is also equipped with two optical digital inputs with a maximum accepted resolution of 192 kHz / 24 bit to simultaneously connect an Audison bit DMI (retrieves digital audio from the car's MOST bus) and the Hi-Res bit Play HD player to the bit Nove.

Thanks to the integration of USS technology (Universal Speakers Simulator), the bit Nove can be correctly connected even to original sources of modern cars equipped with "speaker load detection" function that would otherwise silence the audio outputs.

The bit Nove has nine output channels on RCA connectors that allow you to implement a high number of multi-amplified active audio system configurations, leaving ample operational possibilities to the installer. For each channel, the powerful DSP provides: a 10-pole parametric equalizer that allows optimal adjustment range, a crossover with 68 frequency steps, Butterworth or Linkwitz-Riley type filters with slopes from 6 to 24 dB/Oct and a time delay line.

Passenger presence sensor:
By receiving an electrical signal from an external source, it is possible to: select the digital optical input 2 and activate the D memory saved with the PC Software. For example, the seat belt sensor can be used to activate the setup optimized for driver and passenger.

New Audison DRC AB (optional)
The DRC AB controls the main system functions without the aid of a PC. Thanks to this device, the user can remotely: act on the main adjustments (volume, balance, fader, subwoofer volume), choose between the four memories saved with PC software and select the source among the master inputs, auxiliary inputs and the two optical digital inputs.

Bass Boost Functionality
The bass boost provides additional equalization for low frequencies by acting on the sub and woofer channels. It is possible to freely select the parametric equalization pole to act on and vary the

Manuale utente

n-20180525175221-bit-nove-manuale-ita-manual.pdf

Scheda tecnica

n-20180525175221-bit-nove-tech-sheet-tech-sheet.pdf

Audison Bit Nove Technical Characteristics

Voltage 10.8 ÷ 15 VDC
Operating power supply voltage 7.5 ÷ 14.4 VDC
Idling current 0.53 A
Switched off without DRC 1 mA
Switched off with DRC 4.5 mA
Remote IN voltage 4 ÷ 15 VDC (1mA)
Remote OUT voltage 10 ÷ 15 VDC (130 mA)
ART (Automatic Remote Turn ON) 2 ÷ 7 VDC

SIGNAL STAGE
Distortion - THD @ 1 kHz, 1 VRMS Output 0.005%
Bandwidth @ -3 dB 10 Hz ÷ 22 kHz
S/N ratio @ A weighted
Master Input 102 dBA
AUX Input 101.5 dBA
OPTICAL IN1 / IN2 Inputs 110 dBA
Channel Separation @ 1 kHz 85 dBA
Input sensitivity Pre Master 1.2 ÷ 8 VRMS
Input sensitivity Speaker Master 3 ÷ 20 VRMS
Input sensitivity AUX Master 0.3 ÷ 5 VRMS
Input impedance Pre In / Speaker In / AUX 15 kΩ / 12 Ω / 15 kΩ
Max Output Level (RMS) @ 0.1% THD 4 V

INPUT STAGE
Low level (Pre) Ch1 ÷ Ch6; AUX L/R
High Level (Speaker In) Ch1 ÷ Ch6
Digital 2 x Optical S/PDIF; Max 192 kHz / 24 bit
OUTPUT STAGE
Low level (Pre) Ch1 ÷ Ch9

CONNECTION
From / To Personal Computer 1 x Micro USB
To Audison DRC AB / DRC MP 1 x AC Link
Optical 2 sel Optical In 2 wire control +12 V enable
Mem D sel Memory D wire control GND enable

CROSSOVER
Filter type Full / Hi pass / Low Pass / Band Pass
Filter mode and slope Linkwitz @ 12/24 dB - Butterworth @
6/12/18/24 dB
Crossover Frequency 68 steps @ 20 ÷ 20k Hz
Phase control 0° / 180°

EQUALIZER (20 ÷ 20K Hz)
Analog Input Equalizer Automatic De-Equalization
Output Equalizer N.9 Parametrics Equalizers: ±12 dB;10 pole;
20 ÷ 20k Hz

TIME ALIGNMENT
Distance 0 ÷ 510 cm / 0 ÷ 200.8 inches
Delay 0 ÷ 15 ms
Step 0.08 ms; 2.8 cm / 1.1 inch
Fine SET 0.02 ms; 0.7 cm / 0.27 inch

GENERAL REQUIREMENTS
PC connections USB 1.1 / 2.0 / 3.0 Compatible
Software/PC requirements Microsoft Windows (32/64 bit): Vista,
Windows 7, Windows 8, Windows 10
Video Resolution with screen resize min. 1024 x 600
Ambient operating temperature range 0 °C to 55 °C (32 °F to 131 °F)

SIZE
W (Width) x H (Height) x D (Depth)
mm/inch 130 x 34.5 x 199 / 5.11" x 1.35" x 7.83"
Weight kg/lb 0.7 / 1.5

Discontinued