XDM600/6 6-channel Class D car/marine amplifier

JL Audio
Your price:
€ 647,00
Price per single item (VAT included)
Available on backorder

Information and details

Calculating shipping costs to
Amplifier Type
6 channels
Amplifier Class
D
RMS Power 4 Ohm
6x75 Watt
RMS Power 2 Ohm
6x100 Watt
Signal-to-Noise Ratio
104 dB S/N
S/PDIF Digital Input
No
High Level Input
NO
Size
260 x 180 x 52 mm
Weight
2,6 Kg

JL Audio XDM600/6 full-range car/marine amplifier in Class D with 6 channels, 100 W x 6 at 2 Ω / 75 W x 6 at 4 Ω

The XDM600/6, incredibly flexible, packs exceptional full-range power and delivers 100 watts to each of its six channels at 2 ohms (14.4 V, 1% THD). The technology that makes all this power possible in such a compact chassis is our advanced NexD™ high-speed switching design, which enables full-bandwidth Class D operation with extremely low distortion and remarkable efficiency.

Suitable for car or boat installations, the XDM600/6 is built with marine-grade materials and features an exclusive dual-mode input filter for noise-free performance in boats or cars. It also includes automatic turn-on functionality (via signal sensing or DC offset sensing) to facilitate factory system upgrades.

With the XDM600/6 you have plenty of great usage options. Configure it as a six-channel satellite amplifier with 75 W x 6 at 4 Ω, or connect four of its channels to create a four-channel staggered power amplifier with 200 W x 2 at 4 Ω for front satellites and 75 W x 2 @ 4 Ω for rear satellites. You can also drive two 200 W subwoofers each, plus a pair of 75 W x 2 satellites.

The XDM600/6 includes a 12 dB/octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable crossover frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC remote level controller (water-resistant) (each sold separately), you have the ability to adjust the level of two, four, or all six amplifier channels directly from the driver's seat or pilot house.

JL Audio XDM600/6 technical specifications

Continuous rated power (RMS) at 14.4 V:
@ 4 Ω 75 W RMS x 6
@ 2 Ω 100 W RMS x 6
Bridged @ 4 Ω 200 W RMS x 3

Frequency response 12 Hz - 22 kHz (+0, -1 dB)
S/N ratio, referred to maximum rated power >104 dB below rated power (A-weighted, noise bandwidth 20 Hz - 20 kHz)
S/N ratio, referred to 1 W >84 dB (A-weighted, noise bandwidth 20 Hz - 20 kHz)
Damping factor @ 4 Ω >150 / 50 Hz
Damping factor @ 2 Ω >75 / 50 Hz
THD+N at rated power <1% at 2 Ω per channel.
Input voltage range with RCA inputs 200 mV - 4 V RMS
Minimum copper power/ground wire diameter 4 AWG
Fuse 50 A (AFS, AGU or MaxiFuse™)

Height (H) 2.05" / 52 mm
Width (W) 10.23 inches / 260 mm
Depth (D) 7.09 in / 180 mm
Net weight 5.8 lb / 2.63 kg

€ 647,00 Price incl. VAT