XDM300/1 300 W Class D mono car/marine amplifier

JL Audio
Your price:
€ 449,00
Price per single item (VAT included)
Available on backorder

Information and details

Calculating shipping costs to
Amplifier Type
1 channel
RMS Power 4 Ohm
1x200 Watt
Signal-to-Noise Ratio
100 dB S/N
RMS Power 2 Ohm
1x300 Watt
Size
180 x 174 x 52 mm
Weight
1,7 Kg

JL Audio XDM300/1 class D monoblock amplifier for car and marine, power 300 W 2 Ω / 200 W 4 Ω

This compact monoblock amplifier uses the high-speed NexD switching design to achieve unprecedented efficiency and surprising output power for its size. It is small enough to fit into most applications in tight spaces, including small boats, pickups, motorcycles and UTVs (in a weather-resistant compartment).

Designed for installations on cars or boats, the XDM300/1 is built with marine-grade materials and features an exclusive dual-mode input filter for noise-free performance on boats or cars. It also includes automatic turn-on functionality (via signal sensing or DC offset sensing) to facilitate factory system upgrades.

Specifically designed for subwoofer applications, the XDM300/1 includes a variable slope low-pass filter with continuously variable crossover frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC remote level controller (water-resistant) (each sold separately), the amplifier level can be adjusted directly from the driver's seat or captain's chair.

Finished with an elegant black powder coat, all controls are protected by a removable and sealed top cover for easy access.

JL Audio XDM300/1 technical specifications

Continuous rated power (RMS) @ 14.4 V:
4 Ω 200 W RMS x 1
3 Ω 250 W RMS x 1
2 Ω 300 W RMS x 1

Frequency response 10 Hz - 1 kHz (+0, -1 dB)
S/N ratio, referenced to maximum rated power >100 dB below rated power (A-weighted, noise bandwidth 20 Hz - 20 kHz)
S/N ratio, referenced to 1 W >80 dB (A-weighted, noise bandwidth 20 Hz - 20 kHz)
Damping factor @ 4 Ω >120 / 50 Hz
Damping factor @ 2 Ω >60 / 50 Hz
THD+N at rated power <1% at 2 Ω per channel.
Input voltage range with RCA inputs 200 mV - 4 V RMS
Min. copper Power / Ground Wire Diameter 8 AWG
Fuse 30 A (AFS, AGU or MaxiFuse™)

Height (H) 2.05 inches / 52 mm
Width (W) 6.85 inches / 174 mm
Depth (D) 7.09 inches / 180 mm
Net weight 3.8 lb / 1.72 kg

€ 449,00 Price incl. VAT