XDM200/2 2-channel Class D car/marine amplifier

JL Audio
Your price:
€ 407,00
Price per single item (VAT included)
Available on backorder

Information and details

Calculating shipping costs to
Amplifier Type
2 channels
RMS Power 4 Ohm
2x75 Watt
RMS Power 2 Ohm
2x100 Watt
Mono RMS Power 4Ω
1x200 Watt
Signal-to-Noise Ratio
104 dB S/N
Size
180 x 174 x 52 mm
Weight
1,7 Kg

JL Audio XDM200/2 2-channel full-range car/marine amplifier Class D 100 W x 2 at 2 Ω / 75 W x 2 at 4 Ω

The compact XDM200/2 packs powerful full-range power, delivering the incredible figure of 100 watts per channel at 2 ohms (14.4 V, 1% THD). The technology that makes all this power possible in such a compact chassis is our advanced high-speed switching NexD™ design, which enables full-bandwidth Class D operation with extremely low distortion and remarkable efficiency.

Suitable for car or boat installations, the XDM200/2 is built with marine-grade materials and features an exclusive dual-mode input filter for noise-free performance in boats or cars. Also integrated is automatic turn-on functionality (via signal sensing or DC offset detection) to facilitate factory system upgrades.

The XDM200/2 amplifier includes a 12 dB/octave filter that can be configured as a low-pass or high-pass filter and offers a continuously variable crossover frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC remote level controller (water-resistant) (each sold separately), the amplifier level can be adjusted directly from the driver's seat or cabin.

JL Audio XDM200/2 Technical Specifications

Continuous rated power (RMS) at 14.4 V
@ 4 Ω 75 W RMS x 2
@ 2 Ω 100 W RMS x 2
Bridged @ 4 Ω 200 W RMS x 1

Frequency response 12 Hz - 22 kHz (+0, -1 dB)
S/N ratio, referred to maximum rated power >104 dB below rated power (A-weighted, noise bandwidth 20 Hz - 20 kHz)
S/N ratio, referred to 1 W >84 dB (A-weighted, noise bandwidth 20 Hz - 20 kHz)
Damping factor @ 4 Ω >150 / 50 Hz
Damping factor @ 2 Ω >75 / 50 Hz
THD+N at rated power <1% at 2 Ω per channel.
Input voltage range with RCA inputs 200 mV - 4 V RMS
Min. copper Power/Ground Wire Diameter 8 AWG
Fuse 20 A (AFS, AGU or MaxiFuse™)

Height (H) 2.05 inches / 52 mm
Width (W) 6.85 inches / 174 mm
Depth (D) 7.09 inches / 180 mm
Net weight 3.75 lb / 1.70 kg

€ 407,00 Price incl. VAT