XD600/6v2 six-channel amplifier

JL Audio

Discontinued

Your price:
€ 665,20
Price per single item (VAT included)
Amplifier Type
6 channels
Amplifier Class
D
RMS Power 4 Ohm
6x75 Watt
RMS Power 2 Ohm
6x100 Watt
Signal-to-Noise Ratio
84 dB S/N
S/PDIF Digital Input
No
High Level Input
YES
Crossover
Yes
MAX Power Consumption
50 Ampere
Size
260 x 52 x 180 mm
Weight
2,6 Kg

JL Audio XD600/6 Class D full-range 6-channel amplifier, power 6 x 75 watts @ 4 Ohm, 6 x 100 watts @ 2 Ohm.

This amplifier is incredibly flexible and packs an incredible 100 watts of power for each of its six channels at 2 ohms (14.4V, 1% THD). The breakthrough that made it possible to deliver such power in very compact dimensions is JL Audio's NexD™ ultra-high-speed switching circuit technology, which guarantees extremely low distortion and exceptional efficiency.

With the XD600/6, you have a lot of great options. Use it as a six-channel satellite amplifier with 75 W x 6 @ 4 Ω, or bridge four of its channels to create a four-channel staggered power amplifier with 200 W x 2 @ 4 Ω for your front satellites and 75 W x 2 @ 4 Ω for your rear satellites. You can also drive two subwoofers with 200 W each, plus a pair of satellites with 75W x 2.

The XD600/6 includes a 12 dB/octave filter for each channel bank, which can be configured as a low-pass or high-pass and offers variable crossover frequency selection from 50-500 Hz. With the addition of an HD-RLC remote level control (sold separately), you have the ability to control the level of two, four or all six channel levels of the amplifier from the driver's seat.

Technical Specifications XD600/6

@ 4 Ω 75 W RMS x 6

@ 2 Ω100 W RMS x 6

Bridged @ 4Ω200 W RMS x 3

Frequency Response 12 Hz - 22 kHz (+0, -1dB)

S/N Ratio, referred to highest rated power >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)

S/N Ratio, referred to 1 W>84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)

Damping Factor @ 4 Ω>150 / 50 Hz

Damping Factor @ 2 Ω>75 / 50 Hz

THD+N @ Rated Power <1% @ 2 Ω per Ch.

Input Voltage Range @ RCA Inputs 100 mV - 4 V RMS

Min.Copper Power / Ground Wire Gauge 4 AWG wire

Fuse Rating 50 A (AFS, AGU or MaxiFuse™)

Filter Mode(s) Low-Pass or High-Pass

Filter Slope(s) 12 dB/octave

Filter Frequency Range 50 Hz - 500 Hz

Detented, Calibrated Filter Freq. Potentiometers

Filter Defeat Function

Remote Level Control Optional (HD-RLC)

Remote Level Modes 2 or 4 or All Channels

Channel Input Mode Switch (2/4/6 ch.)

Dimensions and Weight XD600/6:

Height (H) 2.05 in / 52 mm

Width (W) 10.23 in / 260 mm

Depth (D) 7.09 in / 180 mm

Net Weight 5.8 lb / 2.63 kg

Manuale utente

n-20160905120729-xd600-6-man.pdf
Discontinued