SR 5.600 SR series 5-channel class D amplifier with crossover

Audison
Your price:
€ 499,00
Price per single item (VAT included)
In stock, ready to ship

Information and details

Calculating shipping costs to
Amplifier Type
5 channels
Amplifier Class
D
RMS Power 4 Ohm
4x75 + 1x330 Watt
RMS Power 2 Ohm
4x115 + 1x550 Watt
Signal-to-Noise Ratio
105 dB S/N
Total Harmonic Distortion
0,02 % THD
S/PDIF Digital Input
No
High Level Input
YES
Crossover
Yes
MAX Power Consumption
44 Ampere
Size
294x155x47,5 mm
Weight
2,42 Kg

Audison SR 5.600 5-channel SR series amplifier with crossover in Class D

SR line, refined by fully exploiting the functionalities of the most recent amplification devices. After numerous listening tests with professionals and enthusiasts, the Audison research and development team decided to adopt a new Class D technology called ADT (Audison D-Class Technology) for this amplifier line, which made it possible to significantly reduce their size while completely preserving the audio performance that characterizes every Audison project.

As for the electronic design, every aesthetic and functional detail of the Audison SR 5.600 has been carefully considered, obtaining a compact amplifier made of extruded aluminum with rounded corners that facilitates the installation of the product in tight spaces. Thanks to the generous heat sinks on the two short sides of the amplifiers, internal cooling fans are not necessary, which are often a cause of noise and dust accumulation.

As per tradition, SR amplifiers confirm their vocation for versatility by including on all models a complete filter section, suitable for any type of audio system configuration. The controls, protected by a brushed aluminum panel, are located on the top panel of the amplifier, to be easily accessible from above even after the product installation. When the system includes an Audison bit processor, the filter section can be totally excluded.

The optional remote controls VCR-S1 and VCR-S2 offer the possibility to adapt the subwoofer level (-20 / + 6 dB) to your musical preference.

Audison USS

Thanks to the integration of Audison USS (Universal Speakers Simulator) technology in the high-level inputs, SR amplifiers can also be properly connected to OEM sources equipped with the "speaker load detection" function that monitors the presence of a low impedance load enable the audio outputs.

Audison SR 5.600 allows multiple connections

All models are equipped with balanced high-level inputs for connection to the speaker output of the OEM head unit and a low level RCA for after-market ones. When using the high-level input, the ART function (Automatic Remote On/Off) can be enabled to control the amplifiers turn-on with the head unit power button. Furthermore, there is a remote IN / OUT jack to allow the control of multiple amplifiers in cascade that turn on when needed.

Through the PRE-OUT signal using the Speaker-IN input it is possible to interface the amplifier with OEM sources equipped with only amplified outputs, allowing the system expansion.

Manuale utente

n-20191203125555-audison-sr-amplifier-user-manual-rev-01.pdf

Scheda tecnica

n-20191203125555-audison-sr-5600-tech-sheet.pdf

Audison SR 5.600 Technical Specifications

  • Channels 5
  • Class D
  • High level input Yes
  • Low level input Yes
  • Digital input No
  • Power supply voltage / fuse 11 ÷ 15 VDC
  • Operating power voltage 6.5 ÷17 VDC / 2 x 25A
  • Minimum current 2.2 A
  • Idle current when off 0.04 mA
  • Consumption at 14.4 VDC, 2Ω, maximum musical power 44 A
  • Remote output 6.5 ÷ 15 Vcc (150 mA)
  • Remote IN 6.5 ÷ 15 Vcc (1 mA)
  • ART - Automatic remote on/off from speaker OUTPUT BTL (selectable) 1.5 ÷ 7 VDC

Amplifier stage

  • Distortion - THD @ 100 Hz, 4Ω, 70% Rated Power 0.02
  • Bandwidth A 10 Hz ÷ 35 kHz; 10Hz ÷ 500Hz
  • S/N ratio A 105 dBA
  • Damping factor A 100
  • Pre-In input sensitivity 0.2 ÷ 5 VRMS
  • Speaker-In input sensitivity 0.8 ÷ 20 VRMS
  • Total RMS power 1010 W
  • Minimum load impedance
    • 5Ch: 2Ω
    • 3Ch: 4Ω + 4Ω + 2Ω
  • Output power (RMS) @14.4 VDC, 1% THD
    • 5Ch 75 W x 4 + 330 W x 1 (4Ω)
    • 5Ch 115 W x 4 + 550 W x 1 (2Ω)
    • 3Ch 230 W x 2 (4Ω) + 310 W x 1 (4Ω)
    • 3Ch 230 W x 2 (4Ω) + 550 W x 1 (2Ω)
  • Adjustable crossover Yes
€ 499,00 Price incl. VAT