RD-800/6 6-Channel Full Range Amplifier

JL Audio
Your price:
€ 584,00
Price per single item (VAT included)
Available on backorder

Information and details

Calculating shipping costs to

JL Audio RD-800/6 6-Channel Full Range Amplifier

Compact size, minimal heat dissipation and high power: the design of Class D amplifiers offers significant advantages. And our NexD™ switching technology adds further benefits, using advanced pulse width modulation techniques to increase amplifier bandwidth, minimize distortion and improve efficiency.

JL Audio RD-800/6 Technical Specifications

  • Channels 6
  • Physical dimensions (height) 54 mm
  • Physical dimensions (width): 372 mm
  • Physical dimensions (depth) 177 mm
  • Weight: 3.6 kg
  • Operating voltage 10-15 V DC
  • Operating temperature range -4º to 149º F (-20º to 65º C)
  • Amplifier class: Class D
  • Rated continuous power (RMS) (input voltage 14.4 V at 4 Ohm, <1% THD): 75 W x 4 / 150 x 2 / 200 W x 2 / 400 W x 1 (in bridge configuration)
  • Power (RMS) (input voltage 14.4 V at 2 Ω with THD <1%): 100 W x 4/200 x 2
  • Signal-to-noise ratio, referenced to maximum rated power (A-weighted, noise bandwidth 20 Hz - 20 kHz): Analog inputs >104 dB
  • Signal-to-noise ratio, referenced to 1 W (A-weighted, noise bandwidth 20 Hz - 20 kHz): Analog inputs >84 dB
  • Damping factor at 4 Ω >150/50 Hz
  • Damping factor at 2 Ω >75/50 Hz
  • THD+N at rated power <1% at 4 Ω
  • Frequency response (+0, -1 dB) 12 Hz-22 kHz
  • Input voltage range on RCA inputs Switchable from 200 mV-2 V RMS (Low) to 800 mV-8 V RMS (High)
  • Input impedance 10 kΩ (Low) 2.7 kΩ (High)
  • Current draw (in standby) 1,900 mA-2,000 mA
  • Fuse rating 6 channels: 80 A
  • Recommended fuse types AFS, AGU or MaxiFuse™
  • Minimum power/ground copper cable section 4 AWG
  • Protection circuits Over-temperature, ground short circuit, speaker overcurrent
€ 584,00 Price incl. VAT