R2-1200X1 1200 Watt Class D mono amplifier

Rockford Fosgate
Your price:
€ 422,00
Price per single item (VAT included)
Available on backorder

Information and details

Calculating shipping costs to
Amplifier Type
1 channel
Crossover
Yes
RMS Power 4 Ohm
1x400 Watt
RMS Power 2 Ohm
1x800 Watt
RMS Power 1 Ohm
1x1200 Watt
MAX Power Consumption
121 Ampere
Size
285x173x49 mm

Rockford Fosgate R2-1200X1 Prime series monochannel Class D amplifier, 1200 Watt power. Equipped with remote control.

Built for performance, the R2-1200X1 amplifier is a 1200 watt, Class D, capable of operating at 4Ω, 2Ω or 1Ω mono. This amplifier is extremely efficient thanks to its Class D technology that reduces the demand on the vehicle's electrical system. The amplifier also features C.L.E.A.N. circuits to regulate gain settings, more power as voltage increases and the integrated Punch EQ that corrects acoustic deficiencies by offering up to 3 times the bass. For subwoofers, a variable infrared filter and remote level control allow you to tune the bass to the desired level for the music.

Rockford Fosgate R2-1200X1 main features

Balanced differential inputs with RCA pass-through outputs
High level inputs
Automatic turn-on circuit
C.L.E.A.N. setup
Variable input gain adjustment level
R.L.C. Remote level control
Variable infrared filter
On board Punch EQ with continuous variation
Top mounted control panel
Short circuit and overcurrent protection
Compliant with CEA-2006 and CE compliant
Die-cast aluminum heat sink
Full Range Class D
Rollback protection
Fully adjustable 12 dB/octave Butterworth high and low pass crossover

Manuale utente

n-20200416183933-1230-72210-02-c-prime-amp-man.pdf

Rockford Fosgate R2-1200X1 technical features

Number of channels 1
Class D
Frequency response 20 Hz - 250 Hz

Total power (Sum of rated power) 1200 watts
Rated power (Continuous RMS power)
400 Watts x 1 @ 4Ω
800 Watts x 1 @ 2Ω
1200 Watts x 1 @ 1Ω

Dynamic power (PVC / PowerCube®)
489 Watts x 1 @ 4Ω
889 Watts x 1 @ 2Ω
1389 Watts x 1 @ 1Ω

Input sensitivity
Low level: 150 mV - 4 V
High level: 450 mV - 12 V

Total harmonic distortion (THD + noise)
4Ω: <1.0%
2Ω: <1.0%
1Ω: <1.0%

Signal input
Low level: 2 RCA
High level: 4 pin Molex
Signal output
Low level: 2 RCA
Tone controls 0 to +18 dB at 45 Hz

Crossover controls
Low pass: 50 Hz - 250 Hz at 12 dB/Octave Butterworth
Subsonic: 15 Hz - 40 Hz at 12 dB/Octave Butterworth

Power cable gauge 4 AWG
Speaker cable gauge 8 AWG
Operating voltage 9-16 VDC
Recommended fuse (not included) 200 A
Max. Current draw (sinusoidal 13.8 V) 121 A
Dimensions (H x W x D) 1.9" x 6.8" x 11.3" (4.9 cm x 17.3 cm x 28.5 cm)

€ 422,00 Price incl. VAT