PP 86DSP 8-channel amplifier with 64-bit DSP processor

Match
Your price:
€ 704,10
Price per single item (VAT included)
Available on backorder

Information and details

Calculating shipping costs to

Match PP 86DSP has 8 channels of 55 Watts RMS at 4 ohm or 70 Watts RMS at 2 ohm freely configurable, on all channels a powerful 64-bit DSP operates, which performs total control of active filtering parameters, equalization and time alignment. Adjustments can be made by connecting a computer through the USB port and thanks to the PC-Tool program it will be possible to finely operate on all aspects of tuning. There is also a microSD slot where specific tuning profiles for your vehicle can be inserted.

In addition to the 8 amplified channels this amplifier-processor also offers a dedicated pre-out for the sub, freely configurable through the management software, terminated with a pair of RCA and electrically isolated from ground to prevent any "ground loop".

The optional URC2A remote control is configurable via PC-Tool and for example you can control the master level, subwoofer level or Aux input with potentiometers and of course assign any function to the switch.

The PP86 DSP performs its function in this way:

  • Takes the amplified signal from the original source (but it can equally be a standard aftermarket model) through the 2 metre long PP-ISO2 cable supplied.
    *Optional is available the PP-ISO5 cable 5 metres long
  • Converts the amplified (analog) signal into digital signal
  • Performs signal processing (electronic crossover, equalizer, time alignment)
  • Converts the suitably processed digital signal back into analog format
  • Amplifies the obtained signal driving the front, rear speakers and subwoofer, which can remain the original ones or be replaced with higher performance models

The sound result obtained will finally be definable as hi-fi, thanks to proper speaker filtering (thanks to the active crossover) which will finally be able to reproduce sound with natural and appealing timbre (thanks to the equalizer) and a truthful soundstage (thanks to time alignment) that will literally make the speakers disappear (it will be extremely difficult to distinguish their positioning) to leave space only for a new sound stage: every instrument and every artist will occupy the exact space where they were during recording, that is, music... as it should be!


Technical specifications:

  • HD class amplification with MCM technology with "ECO mode"
    The exclusive HD class designed by Audiotec Fischer allows you to achieve record energy savings both by improving the efficiency of amplification stages (better power/heat ratio) and by reducing current consumption to a minimum during operation pauses.
  • Compatible with "Start and Stop" up to 6 Volt voltage
  • 1 input for additional MEC modules (MATCH Extension Card)
  • Power at 4 ohm: 8 x 55 Watts RMS
  • Power at 2 ohm: 8 x 70 Watts RMS
  • DSP resolution: 64 bit
  • AD and DA converters: BurrBrown at 24-bit
  • DSP processor clock: 295 MHz
  • Frequency response: 20 Hz - 22,000 Hz
  • Distortion: <0.015%
  • Signal to noise ratio: > 103 dB (A-weighted)
  • Damping factor: > 100
  • Input impedance: 13 ohm
  • 6 inputs at high level adjustable from 5 to 11 Volt with auto turn-on
  • 1 Aux input with automatic or manual selection
  • 1 optical SPDIF input from 12 to 96 Khz
  • 2 RCA mono outputs processed by the DSP for any additional amplifiers dedicated to the subwoofer
  • Mini USB port for PC connection
  • Socket for optional URC2A remote control configurable via PC-Tool
  • Socket for programmable URC2A remote control (optional)
  • Power supply voltage: 10.5 - 16 Volts (max. 5 sec. below 6 Volts)
  • Dimensions: 185 x 44 x 164 mm

Manuale di installazione

n-20180706120721-ba-pp-86dsp.pdf

1 x MATCH Plug & Play amplifier PP 86DSP 1 x USB cable 1 x Plug & Play connection cable PP-ISO 2 (2.20 metres) 1 x Connection cable for speaker output E - H (0.50 metres) 1 x Connection cable for high level input E + F (0.20 metres) 1 x mounting material 1 x instruction manual Note: for head units without ISO connectors an additional ISO adapter (PP-AC wiring) is required, which must be connected between the ISO wiring (PP-ISO) and the head unit.
€ 704,10 Price incl. VAT