PICO 8|12 DSP micro amplifier with DSP

Mosconi

Discontinued

Your price:
€ 699,00
Price per single item (VAT included)

Mosconi Pico 8|12 mini 8-channel 60W amplifier with DSP designed to be as compact as possible for convenient and perfect integration into the vehicle's original system or for upgrade.
Mosconi Pico 8|12 offers impeccable control of input signals and includes a universal interface for connection with factory head units to get the most out of any original system.

Dimensions: 150x115x45 mm

Mosconi Pico 8|12 hardware features

Signal-controlled power supply:
Unlike Class G/H, power is activated only when needed (High Power) and controlled according to current demand.
Advantage: idle current is between 250mA and 450mA (depending on the speaker circuit).
Particularly interesting for electric mobility and campers

Mosconi Pico 8|12 high-speed PWM amplifier without converter:
High-efficiency PWM amplifier with the world's fastest carrier frequency (> 2MHz), which enables HiRes audio transmission and extremely reduced dimensions. Modulation is performed without DAC directly from the 96kHz TDM signal of the DSP, therefore background noise is virtually zero and THD+N ~ 0.02% / 1W.

Mosconi Pico 8|12 inputs:
- 4x balanced analog inputs (+ 4 with optional extension card), High-Level or Low-Level, with or without ground reference. Load and separation resistance selectable, therefore adaptable to a very wide signal range
- 1x optical SP-Dif digital input (8kHz – 96kHz sampling rate)
- 1x Bluetooth port with SP-Dif – TTL (8kHz – 96kHz, for example for the MOS-BTS Streaming module)
- 1x Digital Audio Bluetooth extension port (BT+)
Synchronous digital input 8kHz - 384kHz flexible for audio sources with 2-16 channels, direct access to DSP without jitter, for example for the MOS-BTS96K Bluetooth Streaming module or extension for analog inputs.

Mosconi Pico 8|12 DSP:
294.912 MHz, 32-bit Audio port, 64-Bit Core.
Double Precision 56Bit filter calculation.
3072 SIMD instructions per sample at 96 kHz.
ASRC ratio from 1:8 to 7.75:1 and 139 dB DNR.

Mosconi Pico 8|12 DSP features:
- 3x 9-band parametric EQ inputs (De-Equalize)
- 6x Delay inputs 0 – 3ms / 0.01ms (De-Delay)
- 10x digital input level controls (signal conditioning)
- 6x 30-band or 4x 30-band + 2x 15-band for group EQ (parametric, relative phase remains stable)
- 12x 10-band output filter (HighPass / LowPass / HighShelf / LowShelf / Notch / Allpass 1st or 2nd order / Speaker-EQ)
- 12x Speaker-Delay 0 – 12ms, 0.01ms
- 12x Speaker Phase switch.
Flexible mixer for signal routing, independent channels, capable of summing and subtracting 10 inputs to 4x2 output groups.
Dynamic EQ, filter and Delay settings
Group EQ, output filter and delay can be adjusted in 4 phases depending on the source or input level

Mosconi Pico 8|12 outputs:
- 8x 60W/RMS speaker output stable 2-ohm (no BTL)
- 4x 2Vrms line output SN/R 112dB
- 1x optical digital output (96kHz / 24Bit, full master capability)

Mosconi Pico 8|12 control:
- 1x USB serial data port (PC connection / GUI)
- 1x Remote connector (connection for RCD, RC-Mini, RTC-Hub)
- 2x Bluetooth control ports (connection MOS-BTM (App), RC-CAN (CAN-Bus control)
- 1x Remote out, 1x Remote in Autosense (for High-Level connections).
Power and input/output connections made by Molex® to have the best possibility for car-specific wiring. Very low operating temperature, the amplifier can be installed in small spaces even where there is little air circulation.

High-speed Noisegate
It is not noticed because it opens faster than the signal processed in the DSP. Automatic configuration, auto-measurement of source noise level

Signal generator
(Dirac / Pink Noise / White Noise / Sine Sweep)

Delay measurement with automatic correction
Accurately measures phase differences and time delay of individual speakers or input signal [active OEM systems], separate measurement hardware is required for speaker measurement

Frequency response measurement with binaural addition
Measures frequency response at any mixer input or output group. Creates an EQ suggestion for de-equalization or speakers, separate measurement hardware is required for speaker measurement. Calculates the volume of individual frequency responses using average weighted logarithmic addition

3 optional selectable modes for Front / Center / Rear - Management
Front:
Crossmix: only left signals are added to the right side via a low pass and a delay (and vice versa). The result is better bass performance with certain power / smaller speakers.
Matrix calculation: monophonic signals extracted from the center algorithm are subtracted from the right / left signals.
Center:
Classic summing (the center displays monophonic signals, only left signals are subtracted, only right signals are weighted, adjustable).
Matrix calculation: an algorithm extracts the relevant signals (voice) and outputs them via the center.
Rear:
Crossmix: filtered subtraction of the opposite side. Effect: front platform width extended.
Matrix calculation: the rear speakers output only specific signal information not relevant for the scene image, extended three-dimensionality is generated via a delay.
The corresponding modes can be selected separately for Center / Front and Rear.

EISA Award Winner 2018/19

"Designed to be as compact as possible despite integrating a complete audio system, the Gladen Pico 8|12 offers impeccable control of input signals and includes a universal interface for connection with factory head units. It features a parametric equalizer with 3×9 bands, the ability to correct any delays and level differences (gain) on input, plus a flexible mixer for signal management. High-speed PWM stages process 96kHz/24-bit audio streams directly, with 12 DSP channels powering eight Class G/H amplifiers. It is the first Mosconi Gladen device to offer the possibility of direct use of the Gladen Aures measurement system and this makes integration simpler than ever. This allows automatic DSP setup and center channel management through various mixing possibilities, direct summing or special algorithms using matrix calculation."

Scheda tecnica

n-20181210092909-mosconi-pico-8-12-dsp-caratteristiche-tecniche.pdf
Discontinued