PICO 8|10 DSP Ultra-compact multichannel DSP amplifier

Mosconi

Discontinued

Your price:
€ 779,00
Price per single item (VAT included)
Amplifier Type
8 channels
Amplifier Class
D
RMS Power 4 Ohm
4x50 + 4x80 Watt
S/PDIF Digital Input
Yes
High Level Input
YES
Crossover
Yes
Size
150 x 160 x 46 mm
Weight
1 Kg

Mosconi PICO 8|10 DSP Ultra-compact amplifier with integrated DSP

Powerful DSP amplifier optimized for factory radio use. Six analog inputs up to 30 V, flexible routing, 3-band input EQ and delay. With 4 x 50 Watts + 4 x 90 Watts, ideal for active and semi-active systems, as well as for classic front + rear + sub applications. With two digital inputs (SP-Dif and BT+) and two processed line outputs ready for the future.

High-speed PWM amplifiers without transducer: High-efficiency PWM output stages with the world's fastest carrier frequency (> 2 MHz), which enables HiRes audio transmission and extremely small dimensions. Modulation occurs without DAC directly from the 96 kHz TDM signal of the DSP, so background noise is close to zero and THD + N ~ 0.02% / 1 W.

Manuale utente

n-20201209122815-imb1128110-manuale-pico-810-20092201.pdf

Mosconi PICO 8|10 DSP Technical Specifications

  • Output power/output side:
    • Output power @ 4Ω: 4 x 50 Watts (channel: 1 - 4) 3-Ohm stable (not bridged!)
    • Output power @ 4Ω: 4 x 90 Watts (Channel: 5 + 6 / 9 + 10) 2-Ohm stable / bridgeable
    • Output power @ 4Ω: 4 x 50 Watts + 2 x 240 Watts (bridged channel 5 + 6 / 9 + 10)
  • Line output: 2 x 2 Vrms Line output (channel: 7 + 8)
  • Input voltage: 0.3 - 15 V
  • Overall efficiency: > 80 %
  • Auto-On (high level only): Off - BTL
  • Dimensions: 150 x 160 x 46 mm
  • Weight: 1050 grams

Inputs

  • 4 x balanced analog inputs (high level) up to 30 V
  • 4 x switchable analog inputs (high level / low level)
  • 1 x SP-Dif optical digital input (sampling frequency 8 kHz - 96 kHz)
  • 1 x bluetooth port with SP-Dif - TTL (8 kHz - 96 kHz, e.g. for Mos_BTS bluetooth streaming module)
  • 1 x extended digital audio bluetooth port (BT+)
  • (flexible synchronous digital input from 8 kHz to 384 kHz for audio sources with 2 - 16 channels, direct DSP access without jitter, e.g. for MOS BTS96k BT streaming module or for extended analog inputs)

DSP

  • 912 MHz, 32-bit audio port, 64-bit core
  • 56-bit double precision filter calculation
  • 6144 SIMD instructions per sample at 48 kHz
  • ASRC from 1:8 to 7.75:1 and 139 dB DNR

Control

  • 1 x USB serial data (PC connection / GUI)
  • 1 x remote connector (analog, for RTC.2 Poti remote control)
  • 2 x bluetooth control port (MOS-BT3.0 connection (App control), RC-Can (CAN bus control)
  • 1 x remote out, 1x remote in, auto-remote with high level connection
  • Connections with MOLEX® pin contacts
  • Very small dimensions with low heat generation, more suitable for installation behind trim panels

Software

  • 3 x 9-band parametric EQ input (de-equalization)
  • 6 x input delay 0 - 3 ms / 0.01 ms (de-delay) 10 x digital input level control (signal conditioning) Flexible mixer for signal routing. 01 ms (de-delay)
  • 10 x digital input level control (signal conditioning)
  • Flexible mixer for signal routing
  • (laterally separate, can sum and subtract, 10 inputs to 4 x 2 output groups)
  • 6 x 30-band or 4 x 30-band + 2 x 15 equalization groups
  • (parametric, relative phase remains stable)
  • 10 x 10 output band filters
  • Highpass / lowpass / highshelf / lowshelf / notch / allpass 1st + 2nd order / speaker-EQ)
  • 10 x speaker delay 0 - 12 ms, 0.01 ms
  • 10 x speaker phase switch
Discontinued