PDX-V9

Alpine

Discontinued

Your price:
€ 570,10
Price per single item (VAT included)
Amplifier Type
5 channels
Amplifier Class
D
RMS Power 4 Ohm
4x100w + 1x500w Watt
RMS Power 2 Ohm
4x100w + 1x500w Watt
Signal-to-Noise Ratio
112 dB S/N
Total Harmonic Distortion
0,03 % THD
S/PDIF Digital Input
No
High Level Input
YES
Crossover
Yes
Size
257x192x51 mm
Weight
2,7 Kg

Alpine PDX-V9 is a complete 5-channel digital amplifier with real power certification; each PDX amplifier is supplied with its own birth certificate. PDX amplifiers are tested and documented to demonstrate their actual output power.

The new Alpine PDX series amplifiers are completely re-engineered for performance, sound quality and reliability. The PDX series is designed for quality sound enthusiasts in the car, all in an ultra-compact format.

RGsound is officially recognized by Alpine as an "Excellent Partner". By purchasing this product you can enjoy a third year of warranty free of charge, upon registration in the appropriate section of the Alpine website.

Alpine products are made according to high quality parameters and are subject to strict controls. For this reason, Alpine electronic products purchased from an "Excellent Partner" sales point enjoy one year of free warranty extension valid only in Italy.

Very Wide Frequency Response

The exceptional frequency response, one of the best available for products in this category, is comparable to products for professional use. 5Hz-100kHz for 4ch, 5Hz-400Hz for Mono (+0,-3dB)

Harmonic Distortion Ratio (THD) vs Frequency

The new PDX amplifiers are not ordinary Class-D amplifiers. Traditionally, Class-D amplifiers are not used for high frequency reproduction. The PDX series is the first Class-D amplifier series that can reproduce the entire range of audio frequencies.

The PDX-M12, PDX-M6, PDX-F6 and PDX-F4 are synonymous with high frequency reproduction.

The THD is actually better at high frequencies, resulting in a clean and clear signal, where the ear is more sensitive to distortions. - <0.005% THD + N @ 1W, <0.05% THD + N @ rated power.


Signal to Noise
These amplifiers have a S/N ratio of up to 95dB S/N @ 1W, 122dB S/N at rated power while maintaining clean and clear sound. Forget unwanted background noise or static. PDX amplifiers deliver crystal clear sound for every piece of music played.

High output power thanks to enhanced power supply section

The new PDX power supply section has been refined to ensure low distortion and noise. system efficiency ~80% (power supply is rated at >90%, output stage is rated >90%).

Power Management Processor
Alpine PDX amplifiers incorporate the new Power Management circuit. The Power Management Processor controls all aspects of amplifier performance, monitoring voltage, temperature and output to ensure uninterrupted power production for non-stop listening. If the amplifier gets too hot, the thermal protection circuit gradually decreases the output power until it cools down. Once the temperature returns to normal, the power automatically increases to the previous level. If the circuit detects a low battery condition, it will progressively decrease the output power, when the voltage returns to normal the power will be restored. This seamless design allows non-stop entertainment without glitches or drop-outs.

Rack Mounting System

The new PDX series amplifiers are 20% slimmer than previous models, with only 2" thickness. The new final stacking system allows you to have no spaces between amplifiers and therefore not waste space in the trunk. The cooling system has also been designed for use with multiple amplifiers.

Speaker Terminals

The speaker terminals allow you to use 10 mm² cables and have a unique design for connecting or simply disconnecting the speakers without the possibility of error.

Power Connector

The new removable power connector has very low resistance and accepts 25 mm² cables, to always ensure the necessary power for amplification and to simplify installation.

Bass Remote Control (RUX-KNOB)
By simply adding the RUX-KNOB (sold separately) you will have total control of the subwoofer levels directly from the driver's seat.

Customizable Aesthetics

The amplifier trim frame is easily removable simply, to be able to customize it. Authorized Alpine installers can offer you modifications to personalize the aesthetics to your taste.

Technical Specifications

Installation

  • Connectors: Quick Connect Terminals for Power Supply and Speaker Output
  • Terminal Layout: One-Sided
  • Mounting Design: Easy Stacking and Smart Installation

General

  • Amplifier Type: Class-D (Digital)
  • Channel Design: 4-channel + 1-channel (Mono)
  • Thermal Protection
  • Low-battery Protection
  • Power Supply: DC-DC PWM Power Supply
  • Board Circuitry: S.T.A.R. Circuit
  • Current Protection: Auto Over Current Protection
  • Power Indicator: Top Mounted LED Power/Status Indicator
  • Crossover: Variable High Pass, Low Pass and Band Pass Filter
  • Input Channel Mode Setting (CH1/2 & CH3/4):
  • Input Channel Mode Setting (Subwoofer)
  • Subsonic Filter: Variable Subsonic Filter
  • Pre-Amp Stage: Discrete
  • Final Outputs: MOSFET
  • Board Design: 6-Layer Glass Epoxy PC Board
  • Bass Control: Remote Bass Control (RUX-KNOB) Ready

Max Power Output Ratings

  • Total Max Power: 1600W

RMS Power Ratings

  • Per Channel into 4ohms, 14.4V (≤1%THD+N): 100W RMS x 4 + 500W RMS x 1
  • Per Channel into 2ohms, 14.4V (≤1%THD+N): 100W RMS x 4 + 500W RMS x 1
  • Bridged into 4ohms, 14.4V (≤1%THD+N): 200W RMS x 2

Sound Tuning

  • Crossover (CH1/2, HPF): 30 - 600 Hz (x1), 300 - 6kHz (x10), -12 dB/oct.
  • Crossover (CH3/4, HPF): 30 - 600 Hz, -12 dB/oct.
  • Crossover (CH3/4, BPF): 30 - 600 Hz (HPF), 300 - 6kHz (LPF, x10), -12 dB/oct.
  • Crossover (Subwoofer): 50 - 600 Hz, -24 dB/oct.
  • Subsonic Filter: 3 - 30 Hz, -24 dB/oct.

General

  • Power Requirements: 14.4 V.DC (11-16 V allowable)
  • Input Sensitivity (RCA Input): 0.2 - 4V (CH1/2, CH3/4), 0.1 - 4V (Subwoofer)
  • Input Impedance: >10k ohms
  • Frequency Response (+0, -3dB: 1W into 4 ohms) for CH-1/2/3/4: 3 - 100kHz
  • Frequency Response (+0, -3dB: 1W into 4 ohms) for Subwoofer: 3 - 600 Hz
  • THD+N (10W into 4 ohms) for CH-1/2/3/4: ≤0.005%
  • THD+N (10W into 4 ohms) for Subwoofer: ≤0.006%
  • THD+N (Rated Power into 4 ohms) for CH-1/2/3/4: ≤0.03%
  • THD+N (Rated Power into 4 ohms) for Subwoofer: ≤0.05%
  • Damping Factor for CH-1/2/3/4: >500 into 4ohms at 100Hz
  • Damping Factor for Subwoofer: >1000 into 4ohms at 100Hz
  • Signal to Noise (Rated Power into 4 ohms) for CH-1/2/3/4: 112 dB
  • Signal to Noise (Rated Power into 4 ohms) for Subwoofer: 119 dB
  • Weight: 2.7 kg

Dimensions

  • Footprint: 257 x 50.8 x 192 mm

Alpine
SBG-1224BP 2 ohm 800W max Alpine
Alpine SBG-1224BP 2 ohm 800W max
Price incl. VAT
€ 169,00

Manuale utente

20140109125318-om-pdx-v9-it.pdf
Discontinued