P400X2 Punch Series

Rockford Fosgate

Discontinued

Your price:
€ 379,00
Price per single item (VAT included)
Amplifier Type
2 channels
RMS Power 4 Ohm
2x125 Watt
RMS Power 2 Ohm
2x200 Watt
Mono RMS Power 4Ω
1x400 Watt
Crossover
Yes
Signal-to-Noise Ratio
105 dB S/N
Size
280 x 60 x 197 mm

Rockford Fosgate Punch series P400X2 class AB two-channel amplifier - Power 2 x 125/200 Watts RMS at 4/2 Ohm

  • High level input capable with Auto Turn-On circuit
  • RCA pass-thru outputs
  • Features C.L.E.A.N. Set-up
  • Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
  • 12dB/octave Butterworth crossover
  • On-board Punch EQ with +18dB boost @ 45Hz.
  • Muted turn on
  • Stealth top mounted control panel
  • Cast aluminum heatsink
  • Short circuit protection
  • Over current protection

Rockford Fosgate was founded by Jim Fosgate in 1973 with the idea of creating an amplifier dedicated to low impedances. The technical innovations developed during the creation of amplifiers were also used in the realization of exclusive speakers optimized for perfect acoustics. Thanks to these important innovations, Rockford Fosgate has established itself throughout the world, starting its global expansion.

Today Rockford Fosgate represents one of the most recognized brands in the Hi-fi sector (car and marine) and is a guarantee of decidedly high quality standards. RGsound is the official retailer for Italy, every product branded Rockford Fosgate purchased on the RGsound.it website enjoys the Italian two-year warranty from the time of purchase.

P400X2 Specifications

  • Number of channels: 2
  • Rated power
  • (Continuous RMS Power): 125 Watts x 2 at 4 Ohm
  • 200 Watts x 2 at 2 Ohm
  • 400 Watts x 1 at 4 Ohm bridged
  • Total power
  • (Sum of rated powers): 400 Watts RMS
  • Dynamic power
  • (PVC/PowerCube® measurement): 149 Watts x 2 @ 4-Ohm 0° Res
  • 256 Watts x 2 @ 2-Ohms 0° Res
  • Bridgeable: Yes
  • Efficiency (average): 72% at 4 Ohm
  • Crossover controls: High-pass/low-pass (HP/LP): 50Hz-250Hz 12dB/octave Butterworth
  • Tone controls: Punch EQ2 Bass: from 0dB to +18dB @ 45Hz and/or
  • Punch EQ2 Treble: from 0dB to +12dB at 12.5kHz
  • The function depends on the position of the LP/AP/HP switch
  • Signal input: High/low level: 1 RCA pair
  • Signal output: Low level: 1 RCA pair
  • Power input connector: Captive C-clamp
  • Power cable gauge: 8 AWG to 4 AWG
  • Speaker output connector: Captive C-clamp
  • Speaker cable gauge: 8 AWG to 18 AWG
  • Heatsink type: Cast aluminum
  • Cooling: Convection
  • Remote controls: Provision for optional Punch level control (PLC2)
  • Visual indicators: Power/protection/thermal LED
  • Input clip LED
  • Output clip LED
  • Circuit topology class: Class A/B
  • Frequency response: 20Hz to 20kHz +/- 1.0dB
  • Shipping weight: TBA Lbs.
  • (TBA Kg.)
  • Dimensions (HxWxD):
    • 2.38 x 7.76 x 11.03 (in)
    • 6.05 x 19.71 x 28.02 (cm)

Scheda tecnica

20131024163833-1230-57270-01-punchamp-it-man.pdf
Discontinued