P400X1 Punch Series

Rockford Fosgate

Discontinued

Your price:
€ 349,00
Price per single item (VAT included)
Amplifier Type
1 channel
Crossover
Yes
RMS Power 4 Ohm
250 Watt
Signal-to-Noise Ratio
105 dB S/N
RMS Power 2 Ohm
1x400 Watt
MAX Power Consumption
60 Ampere
Size
250 x 60 x 197 mm

Rockford Fosgate Punch Series P400X1 Class AB mono channel amplifier - Power 1 x 250/400 Watts RMS at 4/2 Ohm.

P400X1 Features

  • High level input capable with Auto Turn-On circuit
  • RCA pass-thru outputs
  • Features C.L.E.A.N. Set-up
  • Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
  • 12dB/octave Butterworth crossover
  • On-board Punch EQ with +18dB boost @ 45Hz.
  • Muted turn on
  • Stealth top mounted control panel
  • Cast aluminum heatsink
  • Short circuit protection
  • Over current protection

Rockford Fosgate was founded by Jim Fosgate in 1973 with the idea of creating an amplifier dedicated to low impedances. The technical innovations developed during the creation of amplifiers were also used for the realization of exclusive speakers optimized for perfect acoustics. Thanks to these important innovations, the Rockford company established itself throughout the world, giving rise to its global expansion.

Today Rockford Fosgate represents one of the most well-known brands in the Hi-fi sector (car and marine) and is a guarantee of decidedly high quality standards. RGsound is the official reseller for Italy, every Rockford Fosgate branded product purchased on the RGsound.it website enjoys the Italian warranty of two years from the date of purchase.

P400X1 Specifications

Number of Channels: 1
Rated Power
(RMS Continuous Power):
250 Watts x 1 @ 4-Ohm
400 Watts x 1 @ 2-Ohm
Total Power
(Sum of Rated Power):
400 Watts RMS
Dynamic Power
(PVC/PowerCube® Measurement):
327 Watts x 1 @ 4-Ohms 0° Res
563 Watts x 1 @ 2-Ohms 0° Res
Bridgeable: No
Efficiency (average): 73% @ 4-Ohm
Crossover Controls: High-Pass (HP): 50Hz-250Hz 12dB/octave Butterworth
Low-Pass (LP): 50-250Hz 12dB/octave Butterworth
Tone Controls: Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz
Function depends upon LP/AP/HP switch position
Signal Input: Hi/Low level: 1 RCA pair
Signal Output: Low Level: 1 RCA Pair
Power Input Connector: Captive C-Clamp
Power Wire Gauge: 8 AWG to 4 AWG
Speaker Output Connector: Captive C-Clamp
Speaker Wire Gauge: 8 AWG to 18 AWG
Heat Sink Type: Cast aluminum
Cooling: Convection
Remote Controls: Optional Punch Level Control (PLC2) Ready
Visual Indicators: Power
Thermal
Protect
Circuit Topology Class: Class-A/B
Frequency Response: 20Hz to 20kHz +/- 1.0dB
Shipping Weight: TBA Lbs.
(TBA Kg.)
Dimensions (HxWxL): 2.38 x 7.76 x 9.86 (in)
6.05 x 19.71 x 25.04 (cm)

Scheda tecnica

20131024163833-1230-57270-01-punchamp-it-man.pdf
Discontinued