P ONE compact Hi-Res mono amplifier with 1500 Watt RMS

Helix

Discontinued

Your price:
€ 949,00
Price per single item (VAT included)
Amplifier Type
1 channel
Crossover
Yes
RMS Power 4 Ohm
1x500 Watt
Signal-to-Noise Ratio
112 dB S/N
RMS Power 2 Ohm
1x800 Watt
Total Harmonic Distortion
0,01 % THD
RMS Power 1 Ohm
1x1500 Watt
MAX Power Consumption
120 Ampere
Size
260x190x50 mm

Helix P ONE single-channel high-resolution amplifier, suitable for driving subwoofers and speakers, has a rated power that reaches up to 1,500 Watts.

The new P ONE will drive every subwoofer to the absolute maximum, as it delivers unstoppable power with 1,500 Watts of RMS power at 1 Ohm. Its phenomenal stability positions the P ONE as the ideal driver for any subwoofer configuration you can imagine and its enormous damping factor keeps every speaker under full control. If that is still not enough, you can use TwinPower Link to combine two amplifiers and double the output power.

Although the P ONE will drive subwoofers in most cases, it can be used as an "all-powerful" full range amplifier thanks to its wide frequency range up to 40 kHz, extremely low THD and excellent signal-to-noise ratio.

The highest power density ever produced by Audiotec Fischer
This power supply also sets new standards in other respects, as never before has so much power been put in such a compact housing for easier installation. The exclusive "power-to-size" ratio is the result of the extraordinary efficiency of our Class D concept, which goes hand in hand with exceptionally low heat dissipation. A unique effort was also made with the protection circuits, which are particularly important in this power segment. For the first time, a microprocessor-controlled Hall effect current sensor continuously monitors the amplifier's total power consumption in order to enable maximum output power under all conditions.

Finally, P ONE can be upgraded with our optional HDM 1 module (see accessories) which offers an optical input, which means that digital audio signals can be processed losslessly and directly. This is how you get the last bit of performance from this extraordinary amplifier.

Manuale utente

n-20200715130124-ba-helix-p-one-web-04-02-2020.pdf

Helix P ONE technical specifications

RMS power ≤ 1% THD + N:
Normal operation (one amplifier) / TwinPower Link (two amplifiers)
- @ 4 Ohm 1 x 500 Watts / 1 x 1,760 Watts
- @ 2 Ohm 1 x 880 Watts / 1 x 3,000 Watts
- @ 1 Ohm 1 x 1,500 Watts / -
Max. output power per channel: up to 1,800 Watts RMS @ 1 Ohm

Class D amplification technology
Inputs 2 x RCA / Cinch
1 x Remote input
Optional via HDM 1 module: 1 x SPDIF optical (28-96 kHz)
RCA / Cinch input sensitivity 0.5 - 8 Volts
RCA / Cinch input impedance 6 kOhm
Outputs 1 x speaker output
Frequency response 10 Hz - 40,000 Hz
Bass boost
Highpass
Lowpass
Bandpass
Subsonic
Phase
Slope high- / lowpass
Slope subsonic / lowpass
Analog input signal-to-noise ratio 112 dB (A-weighted)
Distortion (THD) <0.01%
Damping factor > 500
Operating voltage 10.5 - 16 Volts (max. 5 sec. down to 6 Volts)
Idle current 1,250 mA
Fuse 4 x 30 A LP-Mini-fuse (APS)
Additional functions Input mode switch, TwinPower Link, HDM slot, Start-Stop functionality
Dimensions (H x W x D) 50 x 260 x 190 mm / 1.97 x 10.24 x 7.48"

Discontinued