MRX-T15

Alpine

Discontinued

Your price:
€ 221,80
Price per single item (VAT included)
Amplifier Type
2 channels
RMS Power 4 Ohm
2x50 Watt
RMS Power 2 Ohm
2x75 Watt
Mono RMS Power 4Ω
150 Watt
Crossover
No
Signal-to-Noise Ratio
104 dB S/N
Total Harmonic Distortion
-0,02% % THD
Size
190x58x230 mm
Weight
2,3 Kg

Replaced by the new MRX-T17

The highest performance for an amplifier
MRX-T15 - 2-Channel Digital Amplifier

The new X-Power amplifiers are fully digital. The successors to the popular V-Power series, utilize many of the technologies from PDX amplifiers, for hyperperforming bass and exceptional power.
The efficiency of digital technology allows for compact design, thermal protection and no power loss after hours of use.


Fully Digital Range

The X-Power series uses much of the same digital technology from the PDX series and achieves high levels of efficiency with excellent sound performance, including low distortion, high S/N ratio and high damping factor

Easy upgrade for every system
The high-level inputs allow you to connect these amplifiers directly to factory sources without PRE-OUT outputs, to upgrade the system by increasing power and providing the ability to install new speakers.

Remote Sensing AUTO ON/OFF
The remote sensing function automatically turns on the amplifier when an input signal is detected. This facilitates installation in cars where remote turn on is not provided.

Reduced footprint
PDX digital technology means high efficiency and therefore X-Power amps are 29% more compact than the previous series, making installation even easier

Real temperature protection
If the heat inside the product reaches excessive levels, the protection circuit reduces power in two successive stages, rather than abruptly interrupting the music. It also provides protection against overvoltage and overcurrent.

FEATURES
Installation

Terminal sides: Two Sides
Screw Mount / Cover: Large sized integrated connectors

General
Amplifier Type: Class-D (Digital)
Design: 2-channel
Thermal Control: Thermal Management Control
Power Supply: MOSFET
Power Supply Design: DC-DC PWM Power Supply
Board Circuitry: S.T.A.R. Circuitry
Current Protection: Over-Current, Over-Voltage and Thermal Protection
Power Indicator: Top Mounted Blue LED Power Indicator
2-Channel Speaker Level Input
Crossover: Variable Lowpass & Highpass Filter
Built-in Bass EQ
Final Outputs: Direct FET
Board Design: 6-layer Glass Epoxy PC Board
Continuously Adjustable Gain Control

SPECIFICATIONS
Max Power Output Ratings
Max Power: 350W

RMS Power
Per channel at 4 ohms, 14.4V (≤1%THD+N): 2 x 50W
Per channel at 2 ohms, 14.4V (≤1%THD+N): 2 x 75W
Bridged at 4 ohms, 14.4V (≤1%THD+N): 1 x 150W

Sound Tuning
Crossover Frequency (LPF/HPF Selectable): Variable, 50 - 400Hz (-12dB/oct.)
EQ (Equalizer): Bass EQ (fc=50Hz) 0 to +12dB

Dimensions
Heat Sink: 190 x 58 x 230 mm
Footprint: 250 x 58 x 230 mm

General
Power Requirements: 14.4V DC (11 - 16V)
Input Sensitivity (RCA Input): 0.2 - 4.0V
Input Sensitivity (Speaker Level Input): 0.5 - 10V
Input Impedance: >10k ohms
Frequency Response (+0, -3dB: 1W into 4 ohms): 5Hz - 45kHz
Frequency Response (+0, -1dB: 1W into 4 ohms): 7Hz - 30kHz
THD+N (10W into 4 ohms): <0.02%
THD+N (Rated Power into 4 ohms): <0.07%
Damping Factor: >500
Signal to Noise (Rated Power into 4 ohms): 104dB
Weight: 2.3kg

Manuale utente

20110414152742-om-mrx-t15-it.pdf
Discontinued