MRX-F30

Alpine

Discontinued

Your price:
€ 252,00
Price per single item (VAT included)
Amplifier Type
4 channels
Amplifier Class
D
RMS Power 4 Ohm
50x4 Watt
RMS Power 2 Ohm
75x4 Watt
Crossover
Yes
S/PDIF Digital Input
No
High Level Input
NO
Signal-to-Noise Ratio
104 dB S/N
Total Harmonic Distortion
-0,02% % THD
Size
190 x 58 x 230 mm

The highest performance for an amplifier

MRX-F30 - 4-Channel Digital Amplifier

The new X-Power amplifiers are completely digital.

Successors to the popular V-Power series, they use many of the technologies from PDX amplifiers, for hyperperforming bass and exceptional power.

The efficiency of digital technology allows for a compact design, thermal protection and no power loss after hours of use.

Completely Digital Range

The X-Power series uses much of the same digital technology as the PDX series and achieves high levels of efficiency with excellent sound performance, including low distortion, high S/N ratio and high damping factor

Easy upgrade for any system

High-level inputs allow you to connect these amplifiers directly to factory sources not equipped with PRE-OUT outputs, so you can upgrade your system by increasing power and providing the ability to install new speakers.

Remote Sensing AUTO ON/OFF

The remote sensing function automatically turns on the amplifier when an input signal is detected. This is to facilitate installation in cars where remote turn on is not provided.

Reduced footprint

PDX digital technology means high efficiency and therefore X-Power amps are 29% more compact than the previous series, making installation even easier.

True Temperature Protection

If the heat inside the product reaches excessive levels, the protection circuit reduces power in two successive stages, rather than abruptly interrupting the music. It also provides protection against overvoltage and overcurrent.

FEATURES

Installation

Terminal Sides: Two Sides
Screw Mounting / Cover: Large integrated connectors

General

Amplifier Type: Class-D (Digital)
Channel Design: 4/3/2 Channel
Thermal Control: Thermal Management Control
Power Supply: MOSFET
Power Supply Design: DC-DC PWM Power Supply
Board Circuitry: S.T.A.R. Circuitry
Current Protection: Over-Current, Over-Voltage and Thermal Protection
Power Indicator: Top Mounted Blue LED Power Indicator
4-Channel Speaker-Level Inputs
Crossover: Variable Lowpass & Highpass Filter
Built-in Bass EQ
Final Outputs: Direct FET
Board Design: 6-layer Glass Epoxy PC Board
Gain Control: Continuously Adjustable Gain Control

SPECIFICATIONS

Max Power Output Ratings

Maximum Power: 650W

RMS Power

Per channel at 4ohms, 14.4V (≤1%THD+N): 50W
Per channel at 2ohms, 14.4V (≤1%THD+N): 75W
Bridge at 4ohms, 14.4V (≤1%THD+N): 150W x 2

Sound Tuning

Crossover Frequency (LPF/HPF Selectable): Variable, 50 - 400Hz (-12dB/oct.)
EQ (Equalizer): Bass EQ (fc=50Hz) 0 to +12dB for CH-3/4

Dimensions

Heat Sink: 190 x 58 x 230 mm
Footprint: 250 x 58 x 230 mm

General

Power Requirements: 14.4V DC (11 - 16V)
Input Sensitivity (RCA Input): 0.2 - 4.0V
Input Sensitivity (Speaker Level Input): 0.5 - 10V
Input Impedance: >10k ohms
Frequency Response (+0, -3dB: 1W into 4 ohms): 5Hz - 45kHz
Frequency Response (+0, -1dB: 1W into 4 ohms): 7Hz - 30kHz
THD+N (10W into 4 ohms):<0.02%
THD+N (Rated Power into 4 ohms): <0.07%
Damping Factor: >500
Signal to Noise (Rated Power into 4 ohms): 104dB
Weight: 2.4kg

Manuale utente

20110414153926-om-mrx-f30-it.pdf
Discontinued