MRV-V500 five-channel digital amplifier

Alpine

Discontinued

Your price:
€ 345,10
Price per single item (VAT included)
Amplifier Type
5 channels
Amplifier Class
D
RMS Power 4 Ohm
4x40 + 1x150 Watt
RMS Power 2 Ohm
4x60 + 1x250 Watt
Signal-to-Noise Ratio
98 dB S/N
Total Harmonic Distortion
0,07 % THD
S/PDIF Digital Input
No
High Level Input
NO
Crossover
Yes
Size
244 x 219 x 55 mm
Weight
2,57 Kg

Five-channel digital amplifier Alpine MRV-V500 V-Power 4 Channels + 1 Mono. High power, compact size.

Alpine MRV-V500 amplifier V-Power series (fourth generation) with compact dimensions, celebrated for its reliability, quality and power.

Each V-Power amplifier is tested and documented at Alpine and is also equipped with its own birth certificate.

Class-D technology provides continuous power to speakers, which operate at 80% efficiency, far superior to conventional Classes A or B.

The thermal management processor installed in the MRV-V500 amplifier ensures continuous music, without interruptions, even after hours and hours of use.

The audio signal is analyzed, compared, and corrected twice before being amplified internally. The result is an amplifier with a wider frequency response, a higher damping factor, and the lowest noise in its class. The MRV-V500 V-Power amplifier can be connected directly to the original source via the speaker input, without using external converters.

Remote Control RUX-KNOB sold separately.

MRV-V500 FEATURES

Amplifier Type: Class-D (Digital)

Channel Design: 5/4/3-Channel

Power Supply Design: DC-DC PWM Power Supply

Power Supply: MOSFET

Pre-Amp Stage: Discrete

Final Outputs: Power MOSFET

Crossover: Variable Lowpass & Highpass Filter

Gain Control: Continuously Adjustable Gain Control

Bass EQ

Remote Turn On: Remote Sensing Function (for Speaker Level Input)

Low-impedance Possibility

Current Protection: Over-Current, Over-Voltage, Under-Voltage and Thermal Protection

Board Circuitry: S.T.A.R. Circuit

Speaker-Level Inputs: 4-channel Speaker Level Inputs

Power Indicator: Top Mounted Blue LED Power Indicator

Thermal Control: Multi-stage Power Limits

Terminal Layout: Two-Sided

Integrated Wire and Mounting Screw Terminals

SPECIFICATIONS MRV-V500

Max Power Output Ratings

Total Max Power: 1100 W

RMS Power Ratings

Per channel into 4 Ohms: CH 1-4 (@14.4V ≤1%THD+N) 40W x 4

Per channel into 4 Ohms: Subwoofer (@14.4V ≤1%THD+N) 150W x 1

Per channel into 2 Ohms: CH 1-4 (@14.4V ≤1%THD+N) 60W x 4

Per channel into 2 Ohms: Subwoofer (@14.4V ≤1%THD+N) 250W x 1

Bridged into 4 ohms, 14.4V (@14.4V ≤1%THD+N) 120W RMS x 2

Sound Tuning

Crossover (CH-1/2 and CH-3/4, HPF): 50 - 400 Hz , -12 dB/oct.

Crossover (Subwoofer, LPF): 50 - 400 Hz, -24 dB/oct.

Equalizer (Bass EQ): 0 to +12 dB (Subwoofer, fc=50 Hz) Variable

Dimensions

Heat Sink (WxHxD) mm: 244.5 x 55 x 219 mm

General

Power Requirements: 14.4 V.DC (11-16V allowable)

Input Sensitivity Subwoofer (RCA Input): 0.2 - 4.0 V

Input Sensitivity CH 1-4 (RCA Input): 0.2 - 4.0 V

Input Impedance: >10k Ohms

Frequency Response Subwoofer (+0, -3 dB: 1W into 4 ohms): 10 Hz - 400 Hz

Frequency Response CH 1-4 (+0, -3 dB: 1W into 4 ohms): 10 Hz - 45 kHz

Frequency Response Subwoofer (+0, -1 dB: 1W into 4 ohms): 20 Hz - 300 Hz

Frequency Response CH 1-4 (+0, -1 dB: 1W into 4 ohms): 20 Hz - 20 kHz

THD+N (10W into 4 Ohms): ≤ 0.02%

THD+N (10W into 2 Ohms): ≤ 0.03%

THD+N (Rated Power into 4 Ohms): ≤ 0.07%

THD+N (Rated Power into 2 Ohms): ≤ 0.09%

Damping Factor Subwoofer (10W into 4 Ohms at 100 Hz): > 500

Damping Factor CH 1-4 (10W into 4 Ohms at 100 Hz): > 90

Signal to Noise (1W into 4 Ohms): > 81 dB

Signal to Noise CH 1-4 (Rated Power into 4 Ohms): > 98 dB

Signal to Noise Subwoofer (Rated Power into 4 Ohms): > 104 dB

Weight: 2.57 kg

Manuale utente

20160329102428-om-mrv-v500-it.pdf
Discontinued