MRV-M1200 Class D mono amplifier, 2400 Watt power, remote bass control

Alpine

Discontinued

Your price:
€ 368,90
Price per single item (VAT included)
Amplifier Type
1 channel
Crossover
Yes
RMS Power 4 Ohm
1x600 Watt
RMS Power 2 Ohm
1x1200 Watt
RMS Power 1 Ohm
1x2400 Watt

Alpine MRV-M1200 Class D monoblock amplifier, maximum power 2400 W. Remote bass control included.

Alpine V-Power Amplifier

The MRV-M1200 power amplifier features high-level inputs, Bass EQ, high and low-level filters, an RMS power of 600 W @ 4 Ohm / 1200 W @ 2 Ohm.

Every Alpine V-Power amplifier is tested and documented to demonstrate its characteristics with its own serial number.

MRV-M1200 is a Class D digital amplifier, with a significant increase in efficiency compared to its predecessors, while maintaining low battery consumption. Class-D technology provides continuous power to speakers, which operate at 80% efficiency, far superior to conventional Classes A or B. Enjoy cleaner bass, even when extreme power is required.

Great Power, Minimal Size

V-Power amplifiers are known for their compact size, but their power should not be underestimated. Even though they have 40% smaller footprint compared to their predecessors, they produce the same amount of power. If more power is needed, even with limited installation space, V-Power is the ideal solution.

The thermal management processor ensures that music is never interrupted even if used for hours and hours. No distortion, no interruption!

Dual Feedback Module

The dual internal error correction technology - which was previously used only with PDX and X-Power amplifiers, is now also integrated in V-Power mono. The audio signal is analyzed, compared, and corrected twice before being amplified internally. The result is an amplifier with a wider frequency response, a higher damping factor, and the lowest noise in its category.

Remote Bass Control Knob Included

With the RUX-KNOB you can easily adjust the amplifier levels directly from the driver's seat.

Manuale utente

n-20201009124818-om-mrv-m1200-it.pdf

Scheda tecnica

n-20201009124818-cn-mrv-m1200-it.pdf

Alpine MRV-M1200 technical specifications

Amplifier type: Class D (digital)

Channel design: 1 channel (Mono)

Power supply design: DC-DC PWM power supply

Power supply: MOSFET

Preamplification stage: discrete

Final outputs: Power MOSFET

Crossover: variable low-pass filter

Gain control: continuously adjustable gain control

Bass EQ: Bass EQ function

Bass control: remote bass control (RUX-KNOB) included

Remote turn-on: remote sensing function (for speaker level input)

Low impedance capability:

Current protection: overcurrent, overvoltage, undervoltage and thermal protection

Board circuit: S.T.A.R. Circuit

RCA output: preamplifier output without fade (4 Volt)

Speaker level inputs: 4-channel speaker level inputs

Power indicator: blue LED power indicator mounted on top

Thermal control: multi-stage power limits

Maximum output power

Maximum total power: 2000 W.

Nominal RMS power

Per channel at 4 ohm: 600 W RMS x 1 (14.4 V at <1% THD + N)

Per channel at 2 ohm: 1200 W RMS x 1 (14.4 V at <1% THD + N)

Sound tuning

Crossover frequency (LPF): 50-400 Hz, -24dB / oct.

EQ (equalizer): 0 to + 12dB, fc = 50Hz



Dimensions

Footprint (L x H x D) mm: 342 x 55 x 219 mm

Heat sink (L x H x D) mm: 305 x 55 x 215 mm

General

Power requirements: 14.4 V DC (11-16 V allowed)

Input sensitivity (RCA input): 0.15 - 4.0 V.

Input sensitivity (speaker level input): 0.4 - 10 V.

Input impedance: > 10k ohm

Frequency response (+0, -3dB: 1W at 4 Ohm) for subwoofer: 10-400 Hz

THD + N (10W at 4 Ohm): ≤ 1%

THD + N (10W at 2 Ohm): ≤ 1%

THD + N (nominal power at 4 ohm): ≤ 1%

THD + N (nominal power at 2 ohm): ≤ 1%

Damping factor (10 W at 4 Ohm at 100 Hz): > 750

Signal to noise (1W at 4 Ohm): > 85 dB

Signal to noise (nominal power at 4 ohm): > 107 dB

Preamplifier output: 4.0 V max.

Remote level: -20 to 0 dB

Weight: 4.16 kg

Discontinued