K1.5000 5,000 Watt competition full range amplifier

Steg
Your price:
€ 816,00
Price per single item (VAT included)
Available on backorder

Information and details

Calculating shipping costs to
Amplifier Type
1 channel
Crossover
Yes
RMS Power 4 Ohm
750 Watt
Signal-to-Noise Ratio
107 dB S/N
RMS Power 2 Ohm
1x1600 Watt
Total Harmonic Distortion
0,03 % THD
MAX Power Consumption
500 Ampere

Steg K1-5000 full range is a mono power amplifier for competition in class D with 5000W Rms, equipped with integrated electronic crossover, INTELLISPEED forced ventilation system and regulated power supply up to 11 volts.

TECHNICAL SPECIFICATIONS:

High-Current power amplifier for car monophonic| 1x750w RMS @4 ohm | 1x1600w RMS @2 ohm | 1x2800w RMS @1 ohm | 1x5000w RMS @0.5 ohm | Integrated electronic LP crossovers | INTELLISPEED forced cooling system | Regulated power supply up to 11 Volt of Battery

750 Watts @ 4 Ohms < 0.3% THD+N
1.600 Watts @ 2 Ohms < 0.3% THD+N
2.800 Watts @ 1 Ohms < 0.3% THD+N
5.000 Watts @ 0.5 Ohms < 0.3% THD+N
10.000 Watts (*) Serial®Power mode @ 1 Ohms < 0.3% THD+N
THD @ 4 Ohm / 14V4 /BRIDGE: < 0.05 % (100Hz / Power rating ref)
THD @ 2 Ohm / 14V4 / BRIDGE: < 0.05 % (100z / Power rating ref)
THD @ 4 Ohm / 14V4 / BRIDGE: < 0.05 % (100Hz / Power rating ref)

STEG K1 5000 MONOPHONIC CLASS D 5000W RMS @ 0.5 OHM!!!!

OPERATION AND COMPONENTS: LOW TOLERANCE OF PASSIVE COMPONENTS
The components used are of selected type and particular value, low tolerance resistors and capacitors are employed, coupling capacities in polyester with high linearity and low thermal drift and made specifically for audio applications. The choice of each individual device has been studied down to the smallest details, each element finds its best placement in the delicate electrical balances of the system in order to ensure exceptional performance, invariable over time.

HIGH QUALITY OF MATERIALS USED
The transport of power supply and output currents is conducted on gold-plated copper bars with high cross-section, raised from the PCB; this solution is able to reduce losses and thermal stress inside the amplifier, protecting all components from deteriorating thermal cycles.

PROTECTION SYSTEM
The D'' Class integrates a global protection system managed by microprocessor that has the task of performing, continuously, the control of the following functions:
- Output short circuit
- DC current across speakers
- Temperature rise
- Muting in power-on transient
- Power supply voltage out of range
- Intelligent fan control "INTELLISPEED"
The numerous "sensors" present on the circuit send a continuous data flow that is processed at very high speed. Thanks to dedicated software, the protection system reacts instantly, intervening appropriately and signaling any malfunctions through the LEDs on the control panel.

GR.I.P.S. - GRound Improved Path System
In order to avoid the generation of ground loops in the connection between car radio and power amplifier, in the past numerous expedients and systems have been adopted including the separation of the amplifier ground from that of the vehicle battery. This system proved to be particularly effective and reliable so much so that the major Hi-Fi car manufacturers adopted it in their designs and used it up to the present day.
In recent years, with the advent of electronic injections this system begins to prove insufficient because it has greater effectiveness on disturbances of electrical origin but is less efficient against those of electromagnetic nature.
Steg has designed the GR.I.P.S. system capable of reducing both types of disturbance, alternative to balanced lines, and with the advantage of not degrading sound quality, maintaining compatibility with existing connections. The GR.I.P.S. circuitry isolates each input ground from the others, preventing the generation of loops even in multi-amplified, multichannel implementations and also reduces installation time ensuring always the highest sound quality.

INTELLISPEED - Intelligent cooling fans power regulator
The efficiency of the D'' Class cooling system is among the highest present on the market. The extraordinary dissipation characteristics are the result of innovative design choices, including the dynamic Intellispeed forced ventilation system controlled by the microprocessor.
The high dissipative power of the finned profile combines with the effectiveness of the 6 fans integrated in the lateral tunnels, positioned to convey cold air to the most appropriate points. The integrated sensors continuously monitor the thermal/electrical conditions of the transistors and diodes, communicating with the microprocessor in real time.
The control system, interpreting the readings, reacts with intelligent fan management, activating them when the heatsink temperature exceeds 40°C. With ventilation activated, the software controls its flow, varying the rotation speed of the fans based on the parameters acquired to ensure always the best working conditions of the D'' Class.

€ 816,00 Price incl. VAT