HX DSP PRO High-end 10-channel processor

Helix

Discontinued

Your price:
€ 639,00
Price per single item (VAT included)

HELIX DSP PRO is the new high-end 10-channel signal processor with 96 Khz sampling, ideal for high definition formats.

HELIX DSP PRO manages digital signals with 96 Khz sampling frequency in all its stages and without conversions. This is thanks to the adoption of the latest generation DSP AUDIO that guarantee an extended frequency response, up to 40 Khz compared to 20/22 Khz, and with more accurate intervention capacity equal to 0.25 dB per intervention step at all levels and only 3.5 mm for time alignments.
Only with the management of signals sampled at 96 Khz can you fully enjoy the quality of high definition audio.

Main features HELIX DSP PRO

  • Latest generation audio DSP with 64 bit resolution
  • Exceptional bandwidth up to 40 Khz, compatible with 96/24 files
  • 30-band parametric equalizer per channel, adjustment at 0.25 dB steps
  • Variable Q factor between 0.5 and 15,
  • Time alignment at 3.5 mm steps
  • Cross-over with various alignments and slopes from 6dB to 42 dB per octave
  • Completely new channel routing system "Drag & Drop",
  • with independent matrix for each output
  • 8 RCA inputs with sensitivity 2 - 4 V or 250 - 500 mV
  • 8 Hi-level inputs with sensitivity 5 - 10 V or 10 - 20 V
  • 1 SPDIF or Optical switchable digital input
  • rem in and rem out, remote control input, USB port for PC connection
  • 10 RCA output channels at 6 V
  • HELIX Extension Card slot (HEC) for auxiliary input modules

Power Save Mode

The "Power Save Mode" system is active by default.

The system works by turning off the amplifiers controlled by the DSP PRO if there is no musical signal at the input for more than 60 seconds. This function becomes essential on many vehicles equipped with the latest generation "CANBUS", where the car radio remains on (only the Display turns off) up to 45 minutes after leaving the vehicle!

Everything returns to normal operation as soon as a musical signal is applied to the input. (max 1 sec.)
It is possible to vary the intervention time or completely disable "Power Save Mode" via the PC-Tool.

Start-/Stop

The switching power supply of the HELIX DSP PRO ensures a constant internal power supply voltage even if the battery voltage drops to 6 Volt during engine start, guaranteeing excellent operation with modern Start & Stop systems

Automatic Digital Signal Detection
Switching between analog and digital inputs occurs automatically as soon as a digital input signal is detected, or, via PC-Tool, manual switching can be set. The latter case involves the connection of the remote control unit.

HELIX Extension Card
Thanks to the new extension module slot called "HEC", it is possible to add an additional optical digital input or an optical output and even a Bluetooth input, for wireless music streaming.

DSP PC-Tool 3.0
With the new PC-Tool 3.0 software you can easily control all the power of the DSP PRO. The graphics, simple and intuitive, have remained largely the same as the previous version, the precision of all interventions has been increased and new functions have been implemented such as the equalizer Autoset, simple, fast and effective, or the new algorithm for adjusting time delays, practical and functional. The limits present in the previous version have been eliminated, in the link between channels with a system completely definable by the user.

Discontinued