FPX 1.1000 compact mono Class D amplifier, 420 Watts RMS power at 4 Ohm

Focal

Discontinued

Your price:
€ 419,00
Price per single item (VAT included)
Amplifier Type
1 channel
Crossover
Yes
RMS Power 4 Ohm
1x420 Watt
Signal-to-Noise Ratio
76 dB S/N
RMS Power 2 Ohm
1x700 Watt
Total Harmonic Distortion
0,08 % THD
RMS Power 1 Ohm
1x1000 Watt
Size
297 x 132 x 53 mm
Weight
2,5 Kg

Focal FPX 1.1000 high-end monocanal amplifier, Class D, Performance series. Active crossover and subsonic filter, bass control included in the package.


FPX 1.1000 is a very compact monocanal amplifier with RMS power at 4 Ohm of 1 x 420 W. Stable at 4, at 2 and at 1 Ohm, specifically designed for subwoofer control, this amplifier combines very high power and some great features. Stable at 2 Ohm and 1 Ohm, equipped with a complete range of settings to adjust low frequency sensitivity, this amplifier is capable of exceptional performance. Whether it's a system for powering an audiophile bass or a powerful subwoofer, the FPX 1.1000 will satisfy all the needs for the bass channel.

FPX 1.1000 main features

Complete range of settings (active crossover, subsonic filter, Bass Boost, phase control)

For an amplifier, efficiency and heat dissipation are two essential qualities to provide high power and good musicality. And to optimize these aspects, FPX amplifiers are equipped with a robust aluminum chassis. The distribution of components on the motherboard has been carefully studied to also optimize the cooling capacity of the chassis. The careful selection of each Class D component (current flow, oversized transformers and high quality capacitors) has made it possible to create powerful but ultra-compact amplifiers that offer excellent musicality. The actual dimensions of the FPX 1.100 are 29.7 x 13.2 x 5.3 cm.

Colossal power for such a compact chassis

Very compact and easy to integrate, the FPX 1.1000 amplifier has been specifically developed to power all types of subwoofers. It is stable at 4 Ohm, 2 Ohm and 1 Ohm, offering respective power of 420, 700 and 1000 Watt RMS.

It is equipped with all the settings you would expect to find in such an efficient bass amplification system: adjustable low-pass active crossover with a slope of 24 dB, subsonic filter with a slope of 24 dB, bass boost and phase control.

The FPX 1.1000 comes with a remote control for bass control from the dashboard, and a pair of output lines to connect a second amplifier. This is particularly useful for creating a bass channel with two subwoofers and two amplifiers.

FPX 1.1000 technical specifications

D Class amplifier - 1 channel
CEA power (4 ohms): 1x420 W rms
Maximum power (2 ohms): 1x700 W rms
Maximum power (bridged 4 ohms): 1x1000 W rms
Bandwidth: 15 – 250 Hz
Total harmonic distortion: 0.08%
SNR (1W/A): >76 dBA
Configurable filters High Pass / Low Pass :
50Hz-250 Hz
Subsonic filter: 10Hz-50Hz
Progressive phase adjustment (0-180°)
Bass boost (0/12dB)
Protections: Short circuit / low impedance /
Reversal of polarity / DC / power drop / heat protection
Dimensions (LxHxW): 297 x 132 x 53 mm
Weight: 2.5 Kg

Scheda tecnica

20160429111307-fpx-1-1000-specification-sheet.pdf
Discontinued