AV quattro High-End 4-channel amplifier, Voce series

Audison
Your price:
€ 839,00
Price per single item (VAT included)
Available on backorder

Information and details

Calculating shipping costs to
Amplifier Type
4 channels
RMS Power 4 Ohm
120 Watt
RMS Power 2 Ohm
2x120 Watt
Crossover
Yes
Signal-to-Noise Ratio
100 dB S/N
Size
220 x 470 x 58 mm

AUDISON AV quattro 4-Channel High-End Amplifier Voice Series

AV quattro is a four-channel amplifier capable of operating in four, three or two channel mode and delivering a total power of 1700 W (RMS). It is designed to handle complex front/rear system and multichannel configurations. The AMP (Amplifier Management Processor) continuously monitors the operational status of the operating system and communicates with the user through 4 LEDs of different colors placed on the top panel.

ART (Automatic Remote Power On/Off) enables automatic turn-on and turn-off when no remote signal is available from the source. Filters with cut-off slope up to 24 dB/oct. allow the use of front-rear, front-sub or multiamplified systems while always having an unfiltered output signal available for system expansion.

AV quattro Features

  • Hi-Res audio certification thanks to 4 ÷ 60k Hz bandwidth.
  • Operation in four, three or two channel mode
  • 4 x 200 W at 2 ohm in audiophile AB class
  • Built-in 24 dB/oct filters with bass-boost and subsonic

Audison
AV bit IN HD Digital interface compatible with AV Series amplifiers Audison
Audison AV bit IN HD Digital interface compatible with AV Series amplifiers
Price incl. VAT
€ 249,00

Manuale d' uso

n-20200129154029-voce-av4-manual.pdf

Scheda tecnica

n-20200129154029-voce-av4-spec.pdf

AUDISON AV quattro Technical Specifications

  • Channels 4
  • AB-Class Class
  • High level input
  • Low level input
  • Supply voltage / fuse 11 ÷ 15 VDC
  • Current at minimum 1.8 A
  • Standby current off 0.02 mA
  • Consumption at 14.4 VDC, 2Ω, maximum music power 55 A
  • Remote output 12 VDC - 50mA
  • Remote IN 7 ÷ 15 VDC - 1mA
  • ART - Automatic turn-on/turn-off from speakers OUTPUT BTL Selectable

Amplifier stage

  • Distortion - THD @ 100 Hz, 4Ω, 70% Rated Power 0.04 %.
  • Bandwidth A (-3 dB, 2 VRMS, 4 Ω): 4 ÷ 60k Hz
  • S/N ratio A (A weighted @ 1 V): 100 dBA
  • Damping factor A (1kHz, 4 Ohm): 100
  • Pre-In input sensitivity 0.3 ÷ 5 V RMS
  • Pre-In impedance 15k Ω
  • Speaker-In input sensitivity 1.4 ÷ 24 V RMS
  • Speaker-In input impedance 5k Ω
  • Total RMS power 800 W
  • Minimum load impedance 2Ω
  • Output power (RMS) @14.4 VDC, 1% THD
    • 4 channels: 120 W x 4 (4Ω)
    • 4 channels: 200 W x 4 (2Ω)
    • 4 channels: 120 W x 2 (4Ω) + 200 W x 2 (2Ω)
    • 3 channels: 120 W x 2 (4Ω) + 400 W x 1 (4Ω)
    • 3 channels: 200 W x 2 (2Ω) + 400 W x 1 (4Ω)
    • 2 channels: 400 W x 1 (4Ω) + 400 W x 1 (4Ω)
  • Adjustable crossover

CEA Specifications

  • Output power @ 4Ω, 1% THD+N, 14.4 V Output power @ 4Ω, 1% THD+N, 14.4 V: 120 W x 4 Ch
  • SN ratio (ref. 1W output) SN ratio (ref. 1 W output): 80 dBA

Inputs

  • Input type Pre IN / Speakers IN
  • Filters Pre OUT Outputs Full range
  • Pass Filter A Filters A Ch and B Ch (Full / Hi-Pass / Lo-Pass): 50 ÷ 50k Hz (2 ranges) @ 12 dB/Oct.
  • Pass Filter B Filter B Ch (Lo-Pass 24 dB mono): 50 ÷ 500 Hz @ 24 dB/Oct.
  • Remote sub volume (-50 ÷ 6) dB

Other

  • Fuse 60 A
  • Weight 7.2 kg
€ 839,00 Price incl. VAT