300/4V3

JL Audio

Discontinued

Your price:
€ 680,00
Price per single item (VAT included)
Amplifier Type
4 channels
Amplifier Class
AB
RMS Power 4 Ohm
4x75 Watt
RMS Power 2 Ohm
4x75 Watt
RMS Power Dual Mono 4 Ohm
2x150 Watt
Crossover
Yes
S/PDIF Digital Input
No
High Level Input
YES
Signal-to-Noise Ratio
89,5 dB S/N
Total Harmonic Distortion
0,03 % THD
Size
340 x 235 x 60 mm

JL Audio 300/4V3 full-range Class A/B 4-channel amplifier, 75 W RMS x 4 power

If you prefer a traditional Class A/B design taken to the maximum level, the 300/4v3 is the amplifier you are looking for; thanks to its exceptional fidelity, reliability and well-designed set of features. This amplifier features JL Audio's exclusive and patented absolute symmetry circuit and R.I.P.S. power supply design for full power delivery (75 W x 4) across a wide range of load impedances and vehicle voltages.

The 300/4V3 amplifier features a total black look and powder-coated aluminum alloy heat sink.

JL Audio 300/4V3 technical features

RMS power 75 W x 4 at 4/3/2/1.5 Ohm
Bridged at 150 W RMS x 2 at 8 Ohm
Bridged 150 W RMS x 2 at 4 Ohm

Frequency response 5 Hz - 30 kHz (+0, -1dB)
S/N ratio, referred to maximum rated power> 108.5 dB (A-weighted, noise bandwidth 20 Hz - 20 kHz)
S/N ratio, referred to 1 W> 89.5 dB (A-weighted bandwidth, 20 Hz - 20 kHz)
Damping factor @ 4 Ω> 300/50 Hz
THD + N @ Rated power <0.03% @ 4 Ω per channel.
Input voltage range @ Switchable RCA Inputs from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
Power cable min. Wire/ground Cable 4 AWG
Rated fuse 40 A (AFS, AGU or MaxiFuse)
Low-pass or high-pass filter mode
Filter slope/s 12/24 dB/octave
Filter frequency range 50 Hz - 5 kHz
Channel input mode selector (2/4 channels)
Height 60 mm
Width 340 mm
Depth 235 mm

Manuale utente

n-20191008112647-300-4v3-man-ch.pdf
Discontinued